WHEEL-COMPRESSOR 2W7222 - Caterpillar

System Fault Mode - Cat Detect is ON. The RADAR detection has located an object. The Active Status Indicator will flash if all five segments on the Proximity Bar are lit. If fewer than five segments are lit, the Active Status Indicator will not flash.Alarm Snooze Feature
Cat Detect has an Alarm Snooze feature. When the Audible Alert sounds, the Active Status Indicator shows a green background and becomes an active button.
Active Mode when the Audible Alert Alarm sounds - The Active Status Indicator now becomes an active, raised Hotkey button. Cat Detect is ON and is active. The machine is in Reverse gear. The Proximity Bar (6) will show three or more lighted segments.Pressing the Active Status Indicator/Button silences the Audible Alert Alarm. Cat Detect is now in the Active/Silenced Mode.
- Cat Detect is ON. The RADAR detection is active. The alarm is silenced or muted. The machine is in Reverse gear. The Audible Alert Alarm will reactivate only when the operator changes the gear from Reverse to either Neutral gear or Forward gear.Lower Information Display Banner
Illustration 10 g06246132
(7) Lower Information Display BannerThe Lower Information Display Banner (7) will appear at the bottom horizontal area on the Information Display. The banner contains a clock.The Lower Information Display Banner also provides a location for relevant user information, such as service faults or pop-up messages.Note: For more information on the Pop-Up Message Banners, refer to the following section in the manual:
Pop-Up Messages and Service Fault CodesNote: Pop-Up Messages are used for a variety of information conditions and severities. The messages are restricted to the Information Display Banner in order to minimize conflicts with the productivity information and safety information that is also shown on the Display.Level 2 (Yellow banner) and Level 3 (Red banner) fault messages will always show in the Lower Information Display Banner, while Level 1 (Gray banner) codes may or may not show in the Lower Information Display Banner.Payload Mode Banners will also appear in the Information Banner if Cat® Performance Measurement is installed.For more information on the Payload Mode Banners, refer to the following section in the manual:
Systems Operation > Menu Navigation > Payload > Payload Banner
Illustration 11 g06256759
(7) Lower Information Display BannerOperator (ID) Identification
Illustration 12 g06246330
(8) Lower Information Display Banner with the Operator ID
(9) OPERATOR buttonThe Operator ID (8) appears in the Lower Information Display Banner. The specific number shows which operator is operating the machine. The Operator ID can be set up by pressing the OPERATOR button (9) and then pressing the Operator ID menu button.Note: For more information on setting the Operator ID, refer to the following section in this manual:
Operator > Operator IDWarning Pop-Up Fault Message
Illustration 13 g06246361
(10) Page Index Arrow
(11) Warning Pop-Up Fault Message Banner containing a Yellow Level 2 Fault Code Message
(12) Alert Reminder Symbol (The Warning Pop-Up Fault Message Banner is reduced and is in the snooze mode)The Lower Information Display Banner also provides a location for displaying warning messages containing Diagnostic Event Fault Codes.Both the Diagnostics list page and its accompanying Details