AVSPARE.COM
parts catalog

WHEEL AR 3237380 - Caterpillar



3237380 WHEEL AR Caterpillar parts WHEEL
Rating:
21
Alternative (cross code) number:
CA3237380
323-7380
3237380
Caterpillar 3237380 WHEEL AR

Buy WHEEL AR 3237380 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

Disconnect Machine
The "Disconnect Machine" option of the File menu allows the user to abort communications with a machine.
Illustration 9 g00642980
Select the "Disconnect Machine" option from the "File" menu.The following occurs after the VIMSpc software aborts communications with the machine:
The connection icon on the status bar indicates that the connection has been disconnected.
The arrows will become red.Install Source Software and Configuration Software
Installing source software and configuration software is a common service procedure for machines that are equipped with VIMSTM. This process is accomplished by using the WinFlash program and the appropriate onboard software. WinFlash is a program that is included with the Electronic Technician Software. Contact the machine product support group for a list of flash software.Electronic Control Module (Flash Program)
The following procedure is used to FLASH software into the VIMS ECM.
Procedure
Connect the data link Cable between the Communication Adapter and Cat Electronic Technician (Cat ET).
Connect the data link cable between the Communication Adapter and the machine diagnostic connector.
Turn ON the disconnect switch and the keyswitch.
Use WinFlash to load the software.VIMSTM Onboard Software Update Worksheet
This worksheet should be completed prior to flashing any new VIMS onboard software. This worksheet will help prevent the loss of stored on-board data and help prevent the loss of "user settings" in the configuration.Note: The service program codes (SPC) can be used to access the information that is required to complete this worksheet. See the System Operation, "Electronic Control Module" section of this manual.Note: Some of the fields in the following worksheet may not apply to the 815K and the 816K. Fill out only the fields applicable to your machine.
Illustration 10 g06195498Note: Before the new VIMS onboard software is flashed, verify that a copy of the current VIMS onboard software is available.Note: A print of the VIMSpc Machine Status Display screen may be used in place of item (4). This print can be used to reference important information about the setup of the machine. Perform the following procedure to make a file that will save the print.Procedure to make a print of the screen
Connect VIMSpc to the machine.
Establish communication.
Access the "Machine Status Display" screen.
Press the Print Screen key to place the print on the clipboard.
Open Windows Paintbrush, Clipboard Viewer, Microsoft Word, or WordPad on the PC.
Use the "paste option" in the "Edit Menu" or press "Ctrl-V" to place the image on the "desktop".
Save the file by:
Open the File Menu.
Select the "Save As" option.
Enter a name for the file in the "Save As" dialog box. Using the serial number or the equipment number of the machine will make the file easy to track.
Select a directory for storage of the file.
Click the "Save" button in the "Save As" dialog box.The file is now saved for later use and you can move the file to the same subdirectory as the "downloaded" files.Downloading Data From The VIMS
Downloading data from the VIMS system is one of the most common functions that is performed with the VIMSpc program.Use the following procedure to download the onboard data.
Connect the 425-6889 Cable to the

Caterpillar SIS machinery equipment:

Caterpillar SIS


Parts wheel Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.