WHEEL & TIRE AR 3657284 - Caterpillar

Bulldozer Blade
Float (1) - Push the lever all the way forward into detent for blade float. In this position, the blade bears against the ground and move up and down following the ground contour.The lever remains in the float (detent) until manually pulled out of detent position. The lever then returns to HOLD. Lower (2) - Push the lever forward to lower the blade. Release the lever and it returns to HOLD. Hold (3) - Release the lever from either raise or lower, and it returns to HOLD. The blade movement stops. Raise (4) - Pull the lever back to raise the blade. Release the lever and it returns to HOLD.Ripper (If Equipped)
Raise (1) - Pull the lever to the left (towards the operator) to raise the ripper. Release the lever and it returns to HOLD. Hold (2) - Move the lever to HOLD to stop the ripper movement. Lower (3) - Push the lever to the right (away from the operator) to lower the ripper. Release the lever and it returns to HOLD.Tool Bar or Dozer - Special Application (If Equipped)
No. 1 and No. 2 Rear Attachment Valve
Float (1) - Push lever (6) or (7) forward to the FLOAT position to allow the implement to follow the ground contour. Lower (2) - Push lever (6) or (7) forward to the LOWER position to lower the implement. Hold (3) - Move lever (6) or (7) to the HOLD position to stop implement movement. Raise (4) - Pull lever (6) or (7) to the RAISE position to raise the implement. Raise Detent (5) - Pull lever (6) or (7) to the RAISE DETENT position to raise the implement. Release the lever and when the implement reaches its maximum height, the lever returns to HOLD.No. 3 Rear Attachment Valve
Lower (1) - Push the lever forward to the LOWER position to lower the implement. Hold (2) - Move the lever to the HOLD position to stop the implement movement. Raise (3) - Pull the lever to the RAISE position to raise the implement. Raise Detent (4) - Pull the lever to the RAISE DETENT position to raise the implement. Release the lever and when the implement reaches its maximum height, the lever returns to HOLD.