WHEEL AS 3775230 - Caterpillar

Illustration 1 g01357372 (1) Dimension for the cylinder head Use a straightedge and a feeler gauge to check the cylinder head for warpage. Flatness of the cylinder head over total span ... 0.05 mm (0.002 inch)Resurface the cylinder head if the warpage exceeds the following value. ... 0.20 mm (0.008 inch)Gasket thickness of cylinder head ... 1.70 0.05 mm (0.067 0.002 inch)Note: The repair limit of the contact surface of the gasket and the repair limit of the cylinder block surface is 0.20 mm (0.008 inch).
Illustration 2 g01526357Note: Put clean engine oil on the threads of the cylinder head bolts.Tighten the bolt 1 through bolt 26 in the numerical sequence that is shown in Illustration 2 to 137 5 N m (100 4 lb ft).