3814206 WHEEL & TIRE GP Caterpillar parts
BG-260D
Rating:
Alternative (cross code) number:
CA3814206
381-4206
3814206
CA3814206
381-4206
3814206
Weight: 336 pounds 152 kg.
ASPHALT PAVER,
Compatible equipment models: 3814206:
Number on catalog scheme:
22
For full view, you need register
Caterpillar parts catalog:
Information:
Installation Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Illustration 1 g01177588
Position bracket assembly (18) to main control valve (12). Install bolts (16) .
Install clips (17) and the pins.
Illustration 2 g01176442
Attach a suitable lifting device to main control valve (12) and position main control valve (12). The weight of main control valve (12) is approximately 36 kg (80 lb). Install bolts (15) .
Illustration 3 g01176441
Connect harness assemblies (14) .
Illustration 4 g01176440
Install cover (13) .
Illustration 5 g01176436
Connect the hoses, the tube assemblies, and the hose assemblies to main control valve (12) .
Illustration 6 g01176430
Connect cable assemblies (11) .
Position cable assembly (9) and tighten nut (10). Connect cable assembly (9) .
Illustration 7 g01176424
Install bracket assembly (8) .
Illustration 8 g01176380
Position refrigerant condenser and mounting (7). Connect bracket (5) and install clip (4). Fasten latch (6) .
Illustration 9 g01176379
Position access door (1). Connect bracket (3) and install clip (2) .
Illustration 10 g01176377
Close access door (1) .
Fill the hydraulic system. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Illustration 1 g01177588
Position bracket assembly (18) to main control valve (12). Install bolts (16) .
Install clips (17) and the pins.
Illustration 2 g01176442
Attach a suitable lifting device to main control valve (12) and position main control valve (12). The weight of main control valve (12) is approximately 36 kg (80 lb). Install bolts (15) .
Illustration 3 g01176441
Connect harness assemblies (14) .
Illustration 4 g01176440
Install cover (13) .
Illustration 5 g01176436
Connect the hoses, the tube assemblies, and the hose assemblies to main control valve (12) .
Illustration 6 g01176430
Connect cable assemblies (11) .
Position cable assembly (9) and tighten nut (10). Connect cable assembly (9) .
Illustration 7 g01176424
Install bracket assembly (8) .
Illustration 8 g01176380
Position refrigerant condenser and mounting (7). Connect bracket (5) and install clip (4). Fasten latch (6) .
Illustration 9 g01176379
Position access door (1). Connect bracket (3) and install clip (2) .
Illustration 10 g01176377
Close access door (1) .
Fill the hydraulic system. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change".
Parts wheel Caterpillar catalog:
2062614
WHEEL AS
RM-350B
RM-350B
2160259
WHEEL AS
CP-573E, CP-64, CP-663E, CP-68B, CP-74B, CP-76, CS-56B, CS-64, CS-663E, CS-683E, CS-68B, CS-74, CS-74B, CS-76B, CS-78B
CP-573E, CP-64, CP-663E, CP-68B, CP-74B, CP-76, CS-56B, CS-64, CS-663E, CS-683E, CS-68B, CS-74, CS-74B, CS-76B, CS-78B
3434268
WHEEL AS
CP-533E, CP-54B, CP-56, CP-573E, CP-64, CP-68B, CP-74B, CS-533E, CS-54, CS-54B, CS-56, CS-563E, CS-56B, CS-583E, CS-64, CS-64B, CS-66B, CS-68B, CS-74, CS-74B
CP-533E, CP-54B, CP-56, CP-573E, CP-64, CP-68B, CP-74B, CS-533E, CS-54, CS-54B, CS-56, CS-563E, CS-56B, CS-583E, CS-64, CS-64B, CS-66B, CS-68B, CS-74, CS-74B
1R1273
WHEEL AS
AP-655C
AP-655C
1R1271
WHEEL AS
AP-655C
AP-655C
2396078
WHEEL AS
CP-433E, CS-423E
CP-433E, CS-423E
1R1397
WHEEL AS
BG-2455D
BG-2455D
2520182
WHEEL AS
RM-300
RM-300
2421603
WHEEL AS
RM-300
RM-300
2421867
WHEEL AS
RM-300
RM-300
2777807
WHEEL AS
AP1000E, BG-260D, BG1000E
AP1000E, BG-260D, BG1000E
3447091
WHEEL AS
AP1000E, BG-260D, BG1000E
AP1000E, BG-260D, BG1000E