WHEEL ASSEM. 3V4266 - Caterpillar

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide", for tools and supplies suitable to collect and contain fluids in Caterpillar machines.Dispose of all fluids according to local regulations and mandates.
Table 1
Required Tools    
Tool    Part Number    Description    Qty    
A     8T-0454     Flow Meter Gp (
20 to 200 L/min (5 to 50 US gpm))     1    
8F-8306 Reducer Bushing     2    
8C-6874 Connector     2    
6V-9746 O-Ring Seal     2    
5P-3413 Pipe Sealant     1    
B     124-2121     Permanent Coupling     1    
124-2153 Coupling     1    
122-6872 Hydraulic Hose    
91.4 cm (36 inch)    
C     4C-6500     Digital Thermometer     1    
D         Vacuum Pump     1    Note: Engine speed is directly related to the output of the steering and charge pump. Make sure that the high idle engine speed is within the specification before the steering and the charge pump are tested.
Drive the machine to a smooth, horizontal surface.
Illustration 1 g01815596
(1) Propel lever (2) Parking brake switch
Move propel lever (1) to the NEUTRAL position.
Move parking brake switch (2) to the ON position.
Illustration 2 g01815598
(3) Throttle control switch (4) Engine start switch
Move throttle control switch