WHEEL AR-TIRE& 5088636 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     138-7573     Link Bracket     4    Start By:
Remove the radiator, the refrigerant condenser, the hydraulic oil cooler and the transmission oil cooler as one unit. Refer to Disassembly and Assembly, "Radiator, Refrig Condenser, and Hyd and TMSN Oil Cooler - Remove".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Personal injury can result from hot coolant, steam and alkali.At operating temperature, engine coolant is hot and under pressure. The radiator and all lines to heaters or the engine contain hot coolant or steam. Any contact can cause severe burns.Remove filler cap slowly to relieve pressure only when engine is stopped and radiator cap is cool enough to touch with your bare hand.Cooling System Conditioner contains alkali. Avoid contact with skin and eyes.
Illustration 1 g01525695
Attach Tooling (A) and a suitable lifting device to radiator assembly (1). The weight of radiator assembly (1) is approximately 36 kg (80 lb).
Remove bolts (2). Use Tooling (A) and the suitable lifting device in order to remove radiator assembly (1) from the refrigerant condenser, the hydraulic oil cooler and transmission oil cooler (3) .