WHEEL AS 5458258 - Caterpillar

Assembly Procedure
Note: This component is being disassembled and displayed for CLEANING PURPOSES ONLY. Many internal parts are not available for this component. Care must be taken during disassembly and assembly in order to prevent damage to unavailable parts.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01362353
Check O-ring seal (12) for wear or for damage. If necessary, replace O-ring seal (12) .
Illustration 2 g01362326
Install housing (10). Install bolts (9). If wiper (11) is worn or damaged replace the clean gas induction valve. Install O-ring seal (8) .
Illustration 3 g01362322
Install O-ring seals (7) onto valve (6). Install valve (6). Tighten valve (6) to a torque of 50 5 N m (37 4 lb ft). Install coil assembly (5) and nut (4). Tighten nut (4) to a torque of 20 3 N m (15 2 lb ft).
Illustration 4 g01362317
Install cover (3). Install bolts (2) .
Illustration 5 g01299976
Install O-ring seal (1) .