WHEEL ASSEM. 7K6011 - Caterpillar

Illustration 9 g06063253
Install barrel assembly (40).
Illustration 10 g06063248
Illustration 11 g06063242
Install bearings (39).
Install port plate (36) and gasket (35).
Install head (38).
Install coupling (37).
Illustration 12 g01325564
Repeat Steps16 through Steps 23 for barrel assembly (34).
Install barrel assembly (34).
Illustration 13 g01325541
Install housing (22) and bolts (21). Tighten bolts (21) to a torque of 110 10 N m (81 7 lb ft).
Illustration 14 g01377507
Illustration 15 g01377504
Install crossover relief valves (14B), backup ring (14D), O-ring seal (14C), O-ring seal (14E) and plugs (14A) into the head.
Illustration 16 g01325540
Install O-ring seal (20), backup ring (19), and O-ring seal (18).
Illustration 17 g01325538
Install O-ring seals (17), backup rings (16), and O-ring seal (15).
Illustration 18 g01325536
Install valve (11). Tighten valve (11) to a torque of 44 3 N m (32 2 lb ft).
Install cartridge (14), coil (12), and nut (13). Tighten nut (13) to a torque of 80 10 N m (59 7 lb ft).
Install the cross over relief valves and the plugs into the head. Tighten plugs (21) to a torque of 110 10 N m (81 7 lb ft).
Illustration 19 g01377500
Install screen (6A).
Illustration 20 g01325526
Install cartridge (6), bolts (5), coil (4), the O-ring seal, and nut (3). Tighten bolts (5) to a torque of 5.5 0.1 N m (49 0.9 lb in).
Illustration 21 g01325527
Install control arm (8) and gasket (7).
Apply Tooling (E) to control arm (8).
Illustration 22 g01325534
Install valve (10) and bolts (9). Tighten bolts (9) to a torque of 13 1 N m (115 9 lb in).
Illustration 23 g01325524
Repeat Steps 34 through Steps 35 for valve (2).
Install bolts (1) and valve (2). Tighten bolts (1) to a torque of 13 1 N m (115 9 lb in).
Bench test the pump before installation into the machine.End By:
Install the pump. Refer to Disassembly and Assembly, "Piston Pump (Hydrostatic) - Install".