WHEEL 8D1189 - Caterpillar

Table 1
APPROXIMATE REFILL CAPACITIES
Compartment or System Liters US Gallons Imperial Gallons
Cooling System 101 26.7 22.2
Fuel Tank 889 235 195.6
Engine Crankcase and filter(1) 37 9.8 8.1
Engine Crankcase and filter(2) 43 11.3 9.4
Power Train Oil 211 55.7 46.4
Hydraulic Tank Oil (Only) 89 23.5 19.6
Each Final Drive 15 3.9 3.3
Roller Frames (Each Compartment) 45 11.9 9.9
Pivot Shaft 30 7.9 6.6
(1) Three Piece Oil Pan
(2) One Piece Oil PanNote: You should increase the quantity of oil in the power train whenever you operate the machine on severe slopes. The quantity of oil in the power train can be increased up to 10 percent. When you operate with this increased oil quantity, prolonged operation in some machine positions can cause high power train oil temperatures. Remove this excessive oil quantity after your work on severe slopes has been completed.Note: For severe slope operation, engine oil should be maintained on the full mark. The engine should never be overfilled with oil.Ecology Drains
Table 2
Ecology Drain (Components)
Location (Drain) Needed Component
Coolant 12.7 mm (0.5 inch)
pipe with 1/2-14 NPTH thread
Transmission 12.7 mm (0.5 inch)
pipe with 1/2-14 NPTH thread
Torque Converter 12.7 mm (0.5 inch)
pipe with 1/2-14 NPTH thread
Engine Oil 25.4 mm (1 inch) pipe with 1-11 1/2 NPTH thread
Hydraulic Tank 126-7914 Oil Drain Coupling
or
25.4 mm (1 inch) pipe with 1-11 1/2 NPTH thread
Bevel Gear Case 4C-8563 Oil Drain Coupling
or
25.4 mm (1 inch) pipe with 1-11 1/2 NPTH thread