WHEEL ASSEM. 8K6953 - Caterpillar

Illustration 1 g01472421
There are several specific safety messages on your machine. The exact location of the hazard and description of the hazard are reviewed in this section. Take the time in order to become familiar with these safety messages.You must be able to read all safety messages. Clean the safety messages in order to read the words. Clean the safety messages in order to see the pictures. Replace the safety messages in order to read the words. Replace the safety messages in order to see the pictures. To clean the safety messages, use a cloth, water and soap. Do not use solvent, gasoline, etc.You must replace a safety message that is damaged or missing. You must replace a safety message that cannot be read. If a safety message is on a part that is replaced, install a new safety message on the part. See your dealer for new labels.Do Not Operate (1)This safety message is located inside the cover of each control box.
g01370904
Do not operate or work on this equipment unless you have read and understand the instructions and warnings in the Operation and Maintenance Manuals. Failure to follow the instructions or heed the warnings could result in serious injury or death.
Falling Hazard (2)This safety message is located on the left and right sides of the screed. The safety message is displayed below the extender's control box.
g01424180
Falling off the machine could cause serious injury or death. No riders while machine is in travel mode. Refer to Operation and Maintenance Manual, "Roading the Machine" for proper roading procedures. Always wear seat belt.
Crush Hazard (3)This safety message is located on the left extender as well as the right extender.
g01371644
Sudden movement of the powered screed extender could crush a person in this area causing serious injury or death. Stay out of this area during machine operation.
Electric Shock (4)
This warning is located on the screed's main control box. This warning is also located along the heating system.
g01392482
To avoid electric shock, disconnect all power at the source prior to performing any maintenance to the heating system.