WHEEL-COMPRESSOR 9Y7232 - Caterpillar

9Y7232 WHEEL-COMPRESSOR Caterpillar parts 3176

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA9Y7232
9Y-7232
9Y7232

Weight: 0.80 pounds 0 kg.

Buy WHEEL-COMPRESSOR 9Y7232 Caterpillar genuine, new aftermarket tractor parts with delivery
TRUCK ENGINE,

Compatible equipment models: 9Y7232:

TRUCK ENGINE 3176 Caterpillar

Number on catalog scheme: 2

Caterpillar 9Y7232 Parts scheme WHEEL-COMPRESSOR

For full view, you need register

Information:

Table 1
Required Tools
Tool Part Number Part Description Qty
A(1) 9U-6198 Crankshaft Turning Tool 1
A(2) 9U-7336 Housing 1
5P-7305 Engine Turning Tool 1
B 230-6284 Timing Pin (Camshaft) 1
C 136-4632 Timing Pin (Crankshaft) 1
268-1966 Adapter 1
(1) The Crankshaft Turning Tool is used on the front pulley.
(2) This Tool is used in the aperture for the electric starting motor.
Use Tooling (A) in order to rotate the crankshaft in the normal direction of rotation until number one piston is in the top center position. Refer to Systems Operation, Testing and Adjusting, "Finding Top Center Position for No. 1 Piston" for the correct procedure.
Make sure that the timing marks on the gears are in alignment.
If the shaft for the fuel injection pump is not in the position shown in illustration 1, the timing of the fuel injection pump may be incorrect. If necessary, remove the fuel injection pump. Refer to Disassembly and Assembly for the correct procedure.
Illustration 1 g03347244
Typical example
If necessary, install the fuel injection pump. Refer to Disassembly and Assembly for the correct procedure. Ensure that the fuel injection pump shaft is in the correct position as shown in illustration 1. The Angle (Y) should be 43 degrees. The Angle (Z) should be 18 degrees.