E220510 WHEEL CYLINDER ASSEMBLY Caterpillar parts
PS-110, PS-130, PS-180
Rating:
Alternative (cross code) number:
CAE220510
E22-0510
E220510
CAE220510
E22-0510
E220510
PNEUMATIC COMPACTOR,
Number on catalog scheme:
7
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
ZZ 9U-7078 Cap 1 Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.Note: SERVICE DATA: TOOLING (ZZ) WILL NOT BE IDENTIFIED IN PHOTOGRAPHS IN THE REMOVAL OR THE INSTALLATION. THIS TOOLING IS SHOWN IN ORDER TO ASSIST THE EXPERIENCED SERVICEMAN.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
Illustration 1 g00930594
Remove panel (1) .
Remove door (2) .
Illustration 2 g00994781
Disconnect quick disconnect (3). Remove clamp (3A) .
Illustration 3 g00930618
Disconnect hose (4) .
Illustration 4 g00930620
Disconnect harness assembly (5). Remove harness assembly (5) from clips (6) .
Remove harness assemblies (7) from clips (8) .
Illustration 5 g00930636
Attach a suitable lifting device to fuel tank (9) .Note: The fuel tank can be removed with fuel in the tank.
Remove bolts (10) in order to remove bracket (11) .
Remove bolts (12) in order to remove bracket (13) .
Remove bolts (14) and the sleeves.
Illustration 6 g00930660
Remove bolts (15) in order to remove bracket (16) .
Illustration 7 g00931414
Lift fuel tank (9) off support (18) in order to disconnect quick disconnect (17). Disconnect quick disconnect (17). Remove fuel tank (9) .
Table 1
Required Tools
Tool Part Number Part Description Qty
ZZ 9U-7078 Cap 1 Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.Note: SERVICE DATA: TOOLING (ZZ) WILL NOT BE IDENTIFIED IN PHOTOGRAPHS IN THE REMOVAL OR THE INSTALLATION. THIS TOOLING IS SHOWN IN ORDER TO ASSIST THE EXPERIENCED SERVICEMAN.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
Illustration 1 g00930594
Remove panel (1) .
Remove door (2) .
Illustration 2 g00994781
Disconnect quick disconnect (3). Remove clamp (3A) .
Illustration 3 g00930618
Disconnect hose (4) .
Illustration 4 g00930620
Disconnect harness assembly (5). Remove harness assembly (5) from clips (6) .
Remove harness assemblies (7) from clips (8) .
Illustration 5 g00930636
Attach a suitable lifting device to fuel tank (9) .Note: The fuel tank can be removed with fuel in the tank.
Remove bolts (10) in order to remove bracket (11) .
Remove bolts (12) in order to remove bracket (13) .
Remove bolts (14) and the sleeves.
Illustration 6 g00930660
Remove bolts (15) in order to remove bracket (16) .
Illustration 7 g00931414
Lift fuel tank (9) off support (18) in order to disconnect quick disconnect (17). Disconnect quick disconnect (17). Remove fuel tank (9) .
Caterpillar parts catalog:
Parts wheel Caterpillar catalog:
33230024
WHEEL, STEERING
CB-414, CB-514, CB-614, PS-110, PS-130, PS-180
CB-414, CB-514, CB-614, PS-110, PS-130, PS-180
1205648
WHEEL ASSEMBLY
PS-110, PS-130, PS-180
PS-110, PS-130, PS-180
E870179
WHEEL ASSEMBLY
PS-110, PS-130
PS-110, PS-130
33230024
WHEEL, STEERING
CB-414, CB-514, CB-614, PS-110, PS-130, PS-180
CB-414, CB-514, CB-614, PS-110, PS-130, PS-180
7X5239
Wheel assy.
CS-431B
CS-431B
02004000
Wheel
Caterpillar
Caterpillar
90100044
Wheel end cover assy.
Caterpillar
Caterpillar
33230022
Wheel, steering
CS-431, CS-433
CS-431, CS-433
1G7259
WHEEL
AP-800
AP-800
33230025
WHEEL, STEERING
CS-431, CS-433
CS-431, CS-433
E870257
WHEEL, STEERING
CB-514
CB-514
4293
WHEEL, 9 X 600
WE-851B
WE-851B
88314
WHEEL WITH RING, REAR
WE-851B
WE-851B
E870179
WHEEL ASSEMBLY
PS-110, PS-130
PS-110, PS-130
1205648
WHEEL ASSEMBLY
PS-110, PS-130, PS-180
PS-110, PS-130, PS-180