1234792 WINDOW-SIDE-RH Caterpillar parts
M312, M315, M318, M320
Rating:
Alternative (cross code) number:
CA1234792
123-4792
1234792
CA1234792
123-4792
1234792
Weight: 15 pounds 6 kg.
WHEELED EXCAVATOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
TRQ Fuel Pump Module Assembly Compatible with 2013 Hyundai Elantra Coupe Elantra GT 14-18 Forte
TRQ TRQ products are covered by a 2-year / 24,000-mile warranty. Warranties cover the cost of products only and do not cover any damage, labor, or any other inconveniences incurred. || Reference Number(s): 1234792,2910417,311103M100,31110A5500,311113E300,311113L000,311113L800,31120B0500,A17123574TG,B0282E,C0282E,CFG1892,E16468,E4521139,E8818,E9109M,FG1892,L33H13350B,L5551335Z,LFB61335XB,LFB61335ZB,P76908,SP1322,SP1381,SP1392,SP3084M
TRQ TRQ products are covered by a 2-year / 24,000-mile warranty. Warranties cover the cost of products only and do not cover any damage, labor, or any other inconveniences incurred. || Reference Number(s): 1234792,2910417,311103M100,31110A5500,311113E300,311113L000,311113L800,31120B0500,A17123574TG,B0282E,C0282E,CFG1892,E16468,E4521139,E8818,E9109M,FG1892,L33H13350B,L5551335Z,LFB61335XB,LFB61335ZB,P76908,SP1322,SP1381,SP1392,SP3084M
$69.08
15 Apr 2024
US: AM Autoparts
Fuel Pump Module Assembly Compatible with 2013 Hyundai Elantra Coupe Elantra GT 14-18 Forte
AM Autoparts 10 Year Warranty This item is backed by our 10-year warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only. Please note: Any modifications to an item of any kind before contacting us will void any and all warranty coverage for this item. Please contact us before modifying the part so that we have the opportunity to correct the situation. || Reference Number(s): 1234792,2910417,311103M100,31110A5500,311113E300,311113L000,311113L800,31120B0500,A17123574TG,B0282E,C0282E,CFG1892,E16468,E4521139,E8818,E9109M,FG1892,L33H13350B,L5551335Z,LFB61335XB,LFB61335ZB,P76908,SP1322,SP1381,SP1392,SP3084M
AM Autoparts 10 Year Warranty This item is backed by our 10-year warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only. Please note: Any modifications to an item of any kind before contacting us will void any and all warranty coverage for this item. Please contact us before modifying the part so that we have the opportunity to correct the situation. || Reference Number(s): 1234792,2910417,311103M100,31110A5500,311113E300,311113L000,311113L800,31120B0500,A17123574TG,B0282E,C0282E,CFG1892,E16468,E4521139,E8818,E9109M,FG1892,L33H13350B,L5551335Z,LFB61335XB,LFB61335ZB,P76908,SP1322,SP1381,SP1392,SP3084M
$75.99
25 Mar 2024
US: AM Autoparts
Fuel Pump Module Assembly Compatible with 2013 Hyundai Elantra Coupe Elantra GT 14-18 Forte
AM Autoparts 10 Year Warranty This item is backed by our 10-year warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only. Please note: Any modifications to an item of any kind before contacting us will void any and all warranty coverage for this item. Please contact us before modifying the part so that we have the opportunity to correct the situation. || Reference Number(s): 1234792,2910417,311103M100,31110A5500,311113E300,311113L000,311113L800,31120B0500,A17123574TG,B0282E,C0282E,CFG1892,E16468,E4521139,E8818,E9109M,FG1892,L33H13350B,L5551335Z,LFB61335XB,LFB61335ZB,P76908,SP1322,SP1381,SP1392,SP3084M
AM Autoparts 10 Year Warranty This item is backed by our 10-year warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only. Please note: Any modifications to an item of any kind before contacting us will void any and all warranty coverage for this item. Please contact us before modifying the part so that we have the opportunity to correct the situation. || Reference Number(s): 1234792,2910417,311103M100,31110A5500,311113E300,311113L000,311113L800,31120B0500,A17123574TG,B0282E,C0282E,CFG1892,E16468,E4521139,E8818,E9109M,FG1892,L33H13350B,L5551335Z,LFB61335XB,LFB61335ZB,P76908,SP1322,SP1381,SP1392,SP3084M
Number on catalog scheme:
3
For full view, you need register
Information:
Which Generate This Code:Two devices with the same serial number that are connected to the system are detected as the same device. For example, two angle sensors are detected.Test Step 1. VERIFY THE SERIAL NUMBER OF THE DEVICEMake a visual check of label on each device in order to ensure that each device has a different serial number.Expected Result:Each device has a separate serial number.Results:
YES - Each device has a separate serial number. Proceed to Test Step 2.
NO - There is a duplicate serial number.Repair: Replace the affected component.STOPTest Step 2. VERIFY THE ELECTRONIC SERIAL NUMBER FOR EACH DEVICE
Connect Caterpillar Electronic Technician (ET) to the machine service connector.
Verify that the devices do not have duplicate electronic serial numbers.Expected Result:There are no duplicate electronic serial numbers.Results:
YES - There are no duplicate serial numbers. Proceed to Test Step 4.
NO - Repair: Replace the affected device.STOPTest Step 3. CHECK THE FUNCTION INSTANCE
Use the "Software Versions" menu in order to verify that the components are installed in the proper location.Refer to System Operation, "Configuration Menu" for additional information.Results:
OK - The function instances are correct. Proceed to Test Step 4.
NOT OK - The function instances are incorrect.Repair: Install the components in the proper location. If the components are in the correct location, check the wiring.STOPTest Step 4. CHECK THE HARNESS FOR AN OPEN
Turn the key start switch and the disconnect switch for the machine to the OFF position.
Disconnect the harness from the knuckle connector that is located on the right side.
Measure the resistance between pin "B" and pin "F".Expected Result:The resistance is less than 5.0 ohms.Results:
YES - The resistance is less than 5.0 ohms. The machine harness is correct. Proceed to Test Step 5.
NO - The resistance is greater than 5000 ohms. The resistance measurement is not correct. There is an open circuit in the machine harness.Repair: The open is in wire T745-YL of the machine harness. Repair the machine harness or replace the machine harness.STOPTest Step 5. CHECK THE HARNESS FOR A SHORT.
Turn the key start switch and the disconnect switch for the machine to the OFF position.
Disconnect the harness from the knuckle connector that is located on the left side.
Measure the resistance between pin "B" and pin "F".Expected Result:The resistance is greater than 5000 ohms.Results:
YES - The resistance is greater than 5000 ohms. The machine harness is correct. Proceed to Test Step 6.
NO - The resistance is less than 5000 ohms. The resistance measurement is not correct. There is a short circuit in the machine harness.Repair: The short is in wire T748-PK of the machine harness. Repair the machine harness or replace the machine harness.STOPTest Step 6. CHECK IF THE DIAGNOSTIC CODE REMAINS.
Inspect the contacts of the harness connectors and clean the harness connectors.
Reconnect all harness connectors.
Turn the disconnect switch and the key start switch to the ON position.
Operate the machine.
Check the status of the "CB 24".Expected Result:The "CB 24" diagnostic code is active.Results:
YES - The "CB 24" diagnostic code is active. The diagnostic code has not been corrected. Repair:
YES - Each device has a separate serial number. Proceed to Test Step 2.
NO - There is a duplicate serial number.Repair: Replace the affected component.STOPTest Step 2. VERIFY THE ELECTRONIC SERIAL NUMBER FOR EACH DEVICE
Connect Caterpillar Electronic Technician (ET) to the machine service connector.
Verify that the devices do not have duplicate electronic serial numbers.Expected Result:There are no duplicate electronic serial numbers.Results:
YES - There are no duplicate serial numbers. Proceed to Test Step 4.
NO - Repair: Replace the affected device.STOPTest Step 3. CHECK THE FUNCTION INSTANCE
Use the "Software Versions" menu in order to verify that the components are installed in the proper location.Refer to System Operation, "Configuration Menu" for additional information.Results:
OK - The function instances are correct. Proceed to Test Step 4.
NOT OK - The function instances are incorrect.Repair: Install the components in the proper location. If the components are in the correct location, check the wiring.STOPTest Step 4. CHECK THE HARNESS FOR AN OPEN
Turn the key start switch and the disconnect switch for the machine to the OFF position.
Disconnect the harness from the knuckle connector that is located on the right side.
Measure the resistance between pin "B" and pin "F".Expected Result:The resistance is less than 5.0 ohms.Results:
YES - The resistance is less than 5.0 ohms. The machine harness is correct. Proceed to Test Step 5.
NO - The resistance is greater than 5000 ohms. The resistance measurement is not correct. There is an open circuit in the machine harness.Repair: The open is in wire T745-YL of the machine harness. Repair the machine harness or replace the machine harness.STOPTest Step 5. CHECK THE HARNESS FOR A SHORT.
Turn the key start switch and the disconnect switch for the machine to the OFF position.
Disconnect the harness from the knuckle connector that is located on the left side.
Measure the resistance between pin "B" and pin "F".Expected Result:The resistance is greater than 5000 ohms.Results:
YES - The resistance is greater than 5000 ohms. The machine harness is correct. Proceed to Test Step 6.
NO - The resistance is less than 5000 ohms. The resistance measurement is not correct. There is a short circuit in the machine harness.Repair: The short is in wire T748-PK of the machine harness. Repair the machine harness or replace the machine harness.STOPTest Step 6. CHECK IF THE DIAGNOSTIC CODE REMAINS.
Inspect the contacts of the harness connectors and clean the harness connectors.
Reconnect all harness connectors.
Turn the disconnect switch and the key start switch to the ON position.
Operate the machine.
Check the status of the "CB 24".Expected Result:The "CB 24" diagnostic code is active.Results:
YES - The "CB 24" diagnostic code is active. The diagnostic code has not been corrected. Repair:
Caterpillar parts catalog:
Parts window Caterpillar catalog:
M312, M315, M318, M320
1806446
WINDOW-REAR
M312, M315, M318, M320
M312, M315, M318, M320
1806439
WINDOW-DOOR
M312, M315, M318, M320
M312, M315, M318, M320
1806447
WINDOW
M312, M315, M318, M320
M312, M315, M318, M320
1882966
WINDOW
M312, M315, M318, M320
M312, M315, M318, M320
1806442
WINDOW
M312, M315, M318, M320
M312, M315, M318, M320
1806441
WINDOW-SLIDING
M312, M315, M318, M320
M312, M315, M318, M320
1806440
WINDOW-LOWER
M312, M315, M318, M320
M312, M315, M318, M320
1806450
WINDOW
M312, M315, M318, M320
M312, M315, M318, M320
1806449
WINDOW-SLIDING
M312, M315, M318, M320
M312, M315, M318, M320
1806448
WINDOW
M312, M315, M318, M320
M312, M315, M318, M320
1806437
WINDOW
M312, M315, M318, M320
M312, M315, M318, M320
1234791
WINDOW-SIDE-LH
M312, M315, M318, M320
M312, M315, M318, M320
1224735
WINDOW-REAR
M312, M315, M318, M320
M312, M315, M318, M320
1224734
WINDOW-SIDE-RH
M312, M315, M318, M320
M312, M315, M318, M320
1224733
WINDOW-SIDE-LH
M312, M315, M318, M320
M312, M315, M318, M320
1145341
WINDOW GP
312, 315, 317
312, 315, 317
1145340
WINDOW GP
312, 315, 317
312, 315, 317
1236514
WINDOW-SLIDING
M312, M315, M318, M320
M312, M315, M318, M320
1236512
WINDOW
M312, M315, M318, M320
M312, M315, M318, M320
1225786
WINDOW
M312, M315, M318, M320
M312, M315, M318, M320
1234834
WINDOW-DOOR
M312, M315, M318, M320
M312, M315, M318, M320
1225797
WINDOW-DOOR
M312, M315, M318, M320
M312, M315, M318, M320
1234793
WINDOW-REAR
M312, M315, M318, M320
M312, M315, M318, M320