WINDOW GP-DOOR 1346220 - Caterpillar

1. Inspect the lights (if equipped) for broken bulbs and lenses. Replace if broken. 2. Inspect and remove any trash build-up in the engine compartment.3. Inspect the cooling system for leaks, faulty hoses and trash build-up. Correct any leaks and remove any trash from the radiator. 4. Inspect the hydraulic system for leaks. Inspect the tank, hoses, tubes, plugs, joints and fittings. Correct any leaks. 5. Inspect the differential under the machine for leaks. 6. Inspect tires for damage and proper inflation. Replace any missing valve caps. 7. Inspect double pump drive for leaks. 8. Be sure the covers and guards are firmly in place. Inspect for damage. 9. Inspect the steps, walkways and handholds for their condition and cleanliness. Inspect the Rollover Protective Structure (ROPS) (if equipped) for damage. If repair is necessary contact your Caterpillar dealer. Tighten any loose ROPS bolts.10. Inspect the operator's compartment for cleanliness. Keep it clean.11. Adjust the rear view mirrors for best vision. 12. Inspect the rubber isolation blocks, between the vibratory drum and the machine frame for damage, cracking or splitting. Refer to the Service Manual or your Caterpillar dealer for the complete isolation block replacement procedure.Window Cleaning
Glass Windows
Typical exampleUse commercially available window cleaning solutions to clean the windows.Plastic Windows
The cab may be provided with plastic windows. They are shatter resistant and reduce the need for vandalism protection.Hairline scratches and minor abrasions can be removed, or minimized, by using a mild automotive or commercial wax. A thin, even coat of wax, polished by hand with a clean cloth, will help prevent further scratching.
Care must be taken when cleaning these windows to prevent damage to the plastic.Never use gasoline, benzine, acetone, carbon tetrachloride, fire extinguisher fluid, anti-ice fluid, lacquer thinner, acids, alkali, or glass cleaner to clean the plastic. These materials will attack the plastic and may cause it to weaken or break. Do not use abrasive cleaners.Do not use scraper blades or other sharp instruments. Do not rub plastic with dry cloth since this builds up a static charge that attracts dust.
Window Cleaning Methods
Aircraft Windshield CleanerApply the cleaner with a soft cloth. Rub with moderate pressure until all dirt is removed. Allow the cleaner to dry. Wipe off with a clean soft cloth. Soap and WaterUse a clean sponge or soft cloth. Wash windows with a mild soap or detergent, and plenty of lukewarm water. Rinse the windows thoroughly. Dry them with a moist chamois shin or moist cellulose sponge. Stubborn Dirt and GreaseWash the windows in a good grade of naptha, isopropyl alcohol or Butyl Cello Solve. Follow by washing them with soap and water.Seat Belt
Inspect for Wear or Damage
Replace the seat belt after three years of usage, regardless of appearance. Seat belt and mounting hardware must be inspected for wear or damage before operating the machine. Replace the belt or mounting hardware if worn or damaged.Brakes, Indicators and Gauges
Test for Proper Function
Look for broken gauge lenses or indicator lights, switches, etc.Start the engine.Look for inoperative gauges. Turn all