WINDOW GP-FRONT 6I5361 - Caterpillar

6I5361 WINDOW GP-FRONT Caterpillar parts 375 L

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA6I5361
6I-5361
6I5361

Weight: 19 pounds 9 kg.

Buy WINDOW GP-FRONT 6I5361 Caterpillar genuine, new aftermarket tractor parts with delivery
EXCAVATOR,

Compatible equipment models: 6I5361:

EXCAVATOR 375 L Caterpillar

Number on catalog scheme: 16

Caterpillar 6I5361 Parts scheme WINDOW GP-FRONT

For full view, you need register

Information:

Sprocket Inspection for 279C, 289C, and 299C
Inspect
Illustration 1 g02789983
Measure the sprocket teeth in three places as shown in illustration 1.
Calculate the average of the 3 measurements to determine the 50% wear limit.
If the average of 3 measurements is less than 178 mm (7 inch), relocate the sprocket to the opposite side of the machine. Follow the steps in the "Relocate" section. If the average of 3 measurements is less than 165 mm (6.5 inch), then replace the sprocket. Follow the steps in the "Replace" section.Relocate
Remove the track on both sides of the machine.
Remove the sprocket on the left side of the machine. Move the sprocket to the right side.
Remove the sprocket on the right side of the machine. Move the sprocket to the left side.
Install the sprockets. Tighten the bolts to the proper torque.
Install the track on both sides of the machine.Replace
Remove the track on both sides of the machine.
Remove the sprocket on the left side of the machine. Install the new sprocket.
Tighten the bolts to the proper torque.
Remove the sprocket on the right side of the machine. Install the new sprocket.
Tighten the bolts to the proper torque.
Install the track on both sides of the machine.