9R7645 WINDOW GP-CAB Caterpillar parts
416B
Rating:
Alternative (cross code) number:
CA9R7645
9R-7645
9R7645
CA9R7645
9R-7645
9R7645
Weight: 36 pounds 16 kg.
BACKHOE LOADER,
Compatible equipment models: 9R7645:
Number on catalog scheme:
51
For full view, you need register
Information:
Digging
Illustration 1 g00101523
Position the stick at a 70 degree angle to the ground.
Illustration 2 g00101525
Position the bucket cutting edge at a 120 degree angle to the ground. Maximum breakout force can now be exerted with the bucket.
Illustration 3 g00101526
Move the stick toward the cab and keep the bucket parallel to the ground.
Illustration 4 g00101527
If the stick stops due to the load, raise the boom and/or perform a curl in order to adjust the depth of the cut.
To apply the greatest force at the cutting edge, decrease the down pressure as you move the stick toward the cab.
Maintain a bucket attitude that ensures a continuous flow of material into the bucket.
Continue the pass in a horizontal direction so that material peels into the bucket.
Illustration 5 g00101528
Close the bucket and raise the boom when the pass has been completed.
Illustration 6 g00101529
Engage the swing control when the bucket is clear of the excavation.
Illustration 7 g00101530
To dump a load, move the stick outward and open the bucket in a smooth motion. Lifting Objects
To prevent injury, do not exceed the rated load capacity of the machine. If the machine is not on level ground, load capacities will vary.
Damage to bucket cylinder, bucket or linkage could result if slings are placed incorrectly.
There may be local regulations and/or government regulations that govern the use of machines which lift heavy objects. Obey all local and government regulations.Short slings will prevent excessive load swing.
Illustration 8 g00101531Use the lifting eye that is provided on the linkage to lift objects.If the lifting eye is used, the connection must be made with a sling or with a shackle.
Illustration 9 g00101532An unstable condition can exist if a load exceeds the machine load rating or if a heavy load is swung over an end or over a side.
Illustration 10 g00101533The most stable lifting position is over a corner of the machine.
Illustration 11 g00101534For the best stability, carry a load close to the machine and to the ground.
Illustration 12 g00101535Lift capacity decreases as the distance from the swing centerline is increased.
Illustration 1 g00101523
Position the stick at a 70 degree angle to the ground.
Illustration 2 g00101525
Position the bucket cutting edge at a 120 degree angle to the ground. Maximum breakout force can now be exerted with the bucket.
Illustration 3 g00101526
Move the stick toward the cab and keep the bucket parallel to the ground.
Illustration 4 g00101527
If the stick stops due to the load, raise the boom and/or perform a curl in order to adjust the depth of the cut.
To apply the greatest force at the cutting edge, decrease the down pressure as you move the stick toward the cab.
Maintain a bucket attitude that ensures a continuous flow of material into the bucket.
Continue the pass in a horizontal direction so that material peels into the bucket.
Illustration 5 g00101528
Close the bucket and raise the boom when the pass has been completed.
Illustration 6 g00101529
Engage the swing control when the bucket is clear of the excavation.
Illustration 7 g00101530
To dump a load, move the stick outward and open the bucket in a smooth motion. Lifting Objects
To prevent injury, do not exceed the rated load capacity of the machine. If the machine is not on level ground, load capacities will vary.
Damage to bucket cylinder, bucket or linkage could result if slings are placed incorrectly.
There may be local regulations and/or government regulations that govern the use of machines which lift heavy objects. Obey all local and government regulations.Short slings will prevent excessive load swing.
Illustration 8 g00101531Use the lifting eye that is provided on the linkage to lift objects.If the lifting eye is used, the connection must be made with a sling or with a shackle.
Illustration 9 g00101532An unstable condition can exist if a load exceeds the machine load rating or if a heavy load is swung over an end or over a side.
Illustration 10 g00101533The most stable lifting position is over a corner of the machine.
Illustration 11 g00101534For the best stability, carry a load close to the machine and to the ground.
Illustration 12 g00101535Lift capacity decreases as the distance from the swing centerline is increased.
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts window Caterpillar catalog:
2291453
WINDOW GP-CAB
301.5, 302.5
301.5, 302.5
2102354
WINDOW GP-CAB
301.5, 302.5
301.5, 302.5
1505986
WINDOW GP-CAB
301.5, 302.5
301.5, 302.5
1505985
WINDOW GP-CAB
301.5, 302.5
301.5, 302.5
1380251
WINDOW GP-SLIDING
902, 906, 908
902, 906, 908
2019983
WINDOW GP-CAB
554, 574
554, 574
1839404
WINDOW GP-CAB
554, 574
554, 574
1605674
WINDOW GP-CAB
554, 574
554, 574