2295264 WIPER GP-WINDOW Caterpillar parts
TH210, TH215
Rating:
Alternative (cross code) number:
CA2295264
229-5264
2295264
CA2295264
229-5264
2295264
TELEHANDLER,
Number on catalog scheme:
For full view, you need register
Information:
Removal Procedure
Park the machine on a hard, level surface. Lower the scraper bowl to the ground and engage the parking brake. Chock the wheels in order to prevent the machine from moving.
Illustration 1 g00541553
Remove 12 bolts (1) and the washers that secure light (2) and cover (3) to housing (4). Move light (2) away from the transmission. Remove cover (3) and the gasket from housing (4) .
Illustration 2 g00541554
Remove bolt (5) and the washer that secures cable (6) to cam (7). Remove nut (8) and the washer that secures cable (6) to housing (4). Move cable (6) away from the housing. Remove 18 bolts (9) and the washers that secure cover (10) to the transmission. Remove cover (10) and the gasket from the transmission.
Illustration 3 g00541555
Remove bolt (11) and the washer that secures spring assembly (12) to housing (4). Remove spring assembly (12) from housing (4). Remove bolt (13) that secures cam (7) to housing (4). Remove cam (7) from housing (4).
Illustration 4 g00541557
Remove two bolts (14) that secure two levers (15) to two rods (16) and housing (4). Remove two levers (15) from two rods (16) and housing (4) .
Illustration 5 g00541578
Note: Mark the position of the rods for installation purposes.
Loosen two locknuts (17) that secure two rods (16) to the hydraulic control valve. Remove two rods (16) from housing (4) and the hydraulic control valve. Remove two bolts (18) and the washers that secure two blocks (19) to housing (4). Remove two blocks (19) from housing (4) .Installation Procedure
Clean all parts and inspect all parts. If any parts are worn or damaged, use new Caterpillar parts for replacement.
Illustration 6 g00541578
Install two blocks (19) to housing (4). Install the washers and two bolts (18) that secure two blocks (19) to housing (4). Install two rods (16) to housing (4) and the hydraulic control valve. Install the rods to the original position in the hydraulic control valve. Tighten two locknuts (17) that secure two rods (16) to the hydraulic control valve. Tighten the locknuts to a torque of 34 7 N m (25 5 lb ft).
Illustration 7 g00541557
Position two levers (15) to two rods (16) and housing (4). Install two bolts (14) that secure two levers (15) to two rods (16) and housing (4).
Illustration 8 g00541555
Position cam (7) to housing (4). Install bolt (13) that secures cam (7) to housing (4). Position spring assembly (12) to housing (4). Install bolt (11) and the washer that secures spring assembly (12) to housing (4) .
Illustration 9 g00541554
Position the gasket and cover (10) to the transmission. Install 18 bolts (9) and the washers that secure cover (10) to the transmission. Position cable (6) to the housing. Install the washer and nut (8) that secures cable (6) to housing (4). Install bolt (5) and the washer that secures cable (6) to cam (7) .
Illustration 10 g00541667
Adjust the transmission control linkage. Loosen two bolts (18). The detent assembly must be in the fourth gear of the cam in order to adjust the transmission control linkage. Center hole (X) around the hex
Park the machine on a hard, level surface. Lower the scraper bowl to the ground and engage the parking brake. Chock the wheels in order to prevent the machine from moving.
Illustration 1 g00541553
Remove 12 bolts (1) and the washers that secure light (2) and cover (3) to housing (4). Move light (2) away from the transmission. Remove cover (3) and the gasket from housing (4) .
Illustration 2 g00541554
Remove bolt (5) and the washer that secures cable (6) to cam (7). Remove nut (8) and the washer that secures cable (6) to housing (4). Move cable (6) away from the housing. Remove 18 bolts (9) and the washers that secure cover (10) to the transmission. Remove cover (10) and the gasket from the transmission.
Illustration 3 g00541555
Remove bolt (11) and the washer that secures spring assembly (12) to housing (4). Remove spring assembly (12) from housing (4). Remove bolt (13) that secures cam (7) to housing (4). Remove cam (7) from housing (4).
Illustration 4 g00541557
Remove two bolts (14) that secure two levers (15) to two rods (16) and housing (4). Remove two levers (15) from two rods (16) and housing (4) .
Illustration 5 g00541578
Note: Mark the position of the rods for installation purposes.
Loosen two locknuts (17) that secure two rods (16) to the hydraulic control valve. Remove two rods (16) from housing (4) and the hydraulic control valve. Remove two bolts (18) and the washers that secure two blocks (19) to housing (4). Remove two blocks (19) from housing (4) .Installation Procedure
Clean all parts and inspect all parts. If any parts are worn or damaged, use new Caterpillar parts for replacement.
Illustration 6 g00541578
Install two blocks (19) to housing (4). Install the washers and two bolts (18) that secure two blocks (19) to housing (4). Install two rods (16) to housing (4) and the hydraulic control valve. Install the rods to the original position in the hydraulic control valve. Tighten two locknuts (17) that secure two rods (16) to the hydraulic control valve. Tighten the locknuts to a torque of 34 7 N m (25 5 lb ft).
Illustration 7 g00541557
Position two levers (15) to two rods (16) and housing (4). Install two bolts (14) that secure two levers (15) to two rods (16) and housing (4).
Illustration 8 g00541555
Position cam (7) to housing (4). Install bolt (13) that secures cam (7) to housing (4). Position spring assembly (12) to housing (4). Install bolt (11) and the washer that secures spring assembly (12) to housing (4) .
Illustration 9 g00541554
Position the gasket and cover (10) to the transmission. Install 18 bolts (9) and the washers that secure cover (10) to the transmission. Position cable (6) to the housing. Install the washer and nut (8) that secures cable (6) to housing (4). Install bolt (5) and the washer that secures cable (6) to cam (7) .
Illustration 10 g00541667
Adjust the transmission control linkage. Loosen two bolts (18). The detent assembly must be in the fourth gear of the cam in order to adjust the transmission control linkage. Center hole (X) around the hex
Caterpillar SIS machinery equipment:
Caterpillar SIS
TH210 Telehandler CEC00001-UP (MACHINE) POWERED BY 3054 Engine »
229-5264
WIPER GP-WINDOW
TH215 Telehandler CEG00001-UP (MACHINE) POWERED BY 3054 Engine »
229-5264
WIPER GP-WINDOW
TH210 Telehandler MHT00001-UP (MACHINE) POWERED BY 3054C Engine »
229-5264
WIPER GP-WINDOW
TH215 Telehandler MHS00001-UP (MACHINE) POWERED BY 3054C Engine »
229-5264
WIPER GP-WINDOW
Caterpillar parts catalog:
Parts wiper Caterpillar catalog:
2478426
WIPER GP-WINDOW
323D L, 323D LN, 324D, 324D LN, 325D, 325D L, 329D L, 330D, 330D L, 330D LN, 330D MH, 336D L, 336D LN, 345C, 345C L, 345D, 345D L, 365C, 365C L, 365C L MH, 385C, 385C FS, 385C L
323D L, 323D LN, 324D, 324D LN, 325D, 325D L, 329D L, 330D, 330D L, 330D LN, 330D MH, 336D L, 336D LN, 345C, 345C L, 345D, 345D L, 365C, 365C L, 365C L MH, 385C, 385C FS, 385C L
3973879
WIPER & WASHER GP-WINDOW
621H, 621K, 623H, 623K, 623K LRC, 627H, 627K, 627K LRC
621H, 621K, 623H, 623K, 623K LRC, 627H, 627K, 627K LRC
3W4939
WIPER GP-WINDSHIELD
943, 953, 963, 973
943, 953, 963, 973
3431195
WIPER AR-WINDOW
324D L, 329D L, 329D LN, 330D, 336D L, 336D LN, 345D L VG
324D L, 329D L, 329D LN, 330D, 336D L, 336D LN, 345D L VG
1370023
WIPER GP-WINDOW
784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793C, 793D
784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793C, 793D
1726831
WIPER GP-WINDOW
120H, 120K, 120K 2, 12H, 12K, 135H, 140H, 140K, 140K 2, 143H, 14H, 160H, 160K, 163H, 16H
120H, 120K, 120K 2, 12H, 12K, 135H, 140H, 140K, 140K 2, 143H, 14H, 160H, 160K, 163H, 16H
3809246
WIPER & WASHER GP-WINDOW
824K, 825K, 826K, 834K, 836K, 988K
824K, 825K, 826K, 834K, 836K, 988K
1V5631
WIPER SERVICE GROUP
814, 815, 816, 950, 966C, 980B
814, 815, 816, 950, 966C, 980B
6W6328
WIPER & WASHER GP
518, 518C
518, 518C
1224835
WIPER & MONITOR GP-WINDOW
311B, 320B, 322B LN, 325B L, 330B L, 345B II, 345B L
311B, 320B, 322B LN, 325B L, 330B L, 345B II, 345B L
1068341
WIPER GP-WINDOW
769D, 771D, 773D, 775D, 776D, 777D
769D, 771D, 773D, 775D, 776D, 777D
2638848
WIPER & WINDOW AR-CAB
323D L, 323D LN, 324D, 324D LN, 325D, 325D L, 329D L, 330D, 330D L, 330D LN, 330D MH, 336D L, 345C, 345C L, 345D, 345D L, 365C, 365C L, 365C L MH, 374D L, 385C, 385C FS, 385C L, 390D L
323D L, 323D LN, 324D, 324D LN, 325D, 325D L, 329D L, 330D, 330D L, 330D LN, 330D MH, 336D L, 345C, 345C L, 345D, 345D L, 365C, 365C L, 365C L MH, 374D L, 385C, 385C FS, 385C L, 390D L