WIPER & WASHER GP-WINDOW 3642813 - Caterpillar

When Required
Engine Air Intake System - Service filters Fuel System - Service when loss of power Radiator - Replace cap, clean core Cooling System - Replace coolant if dirty Fuses and Circuit Breakers - Replace/Reset Bucket Teeth - Replace if damaged Bucket Edge - Replace if damaged Water Separator (If Equipped) - Change element Front and Rear Differentials and Final Drives - Check oil level Seat - LubricateEvery 10 Service Hours or Daily
Engine Oil (EO) - Check oil level Transmission Oil (TDTO) - Check oil level Hydraulic Oil (HYDO) - Check oil level Cooling System - Check coolant level Fuel Tank - Drain water and sediment Air Reservoir - Drain water and sediment Water Separator (If Equipped) - Drain water and sediment Walk-Around Inspection - Inspect machine Seat Belt - Inspect Brakes, Indicators and Gauges - Test Back-up Alarm (If Equipped) - TestEvery 50 Service Hours or Weekly*
Bucket Pivot Pins (MPGM) - Lubricate 4 fittings Tires - Check inflation pressureEvery 100 Service Hours or 2 Weeks*
Bucket Control Cylinder and Linkage (MPGM) - Lubricate 14 fittings Lift Arm and Lift Cylinder Trunnion Bearings (MPGM) - Lubricate 6 fittings Rear Axle Trunnion Bearings (MPGM) - Lubricate 2 fittings Frame Upper Pivot Bearing (MPGM) - Lubricate 1 fitting Steering Cylinder Bearings (MPGM) - Lubricate 4 fittings Transmission Filter (3F/3R) - Change on new or rebuilt transmission after first 100 service hoursEvery 250 Service Hours or Monthly*
Engine Oil and Filter - Change oil and filter. If the sulfur content is the fuel is greater than 1.5% by weight, use an oil with a TBN of 30 and reduce the oil change interval by one half Engine Valve Lash - Adjust on new or reconditioned engines at first oil change only Cooling System - Add additive Fan Bearing (MPGM) - Lubricate 1 fitting Brake Fluid Reservoirs (BF) - Check oil level Brakes - Test Fan and Alternator Belts - Inspect/Adjust Batteries - InspectEvery 500 Service Hours or 3 Months*
Transmission Filter - Change Hydraulic System - Service elements/cap Fuel System - Change filter/Clean screen Fuel Tank Cap and Fill Screen - Clean Engine Crankcase Breather - CleanEvery 1000 Service Hours or 6 Months*
Transmission Oil (TDTO) - Change Drive Shaft Universal Joints (MPGM) - Lubricate 5 fittings Drive Shaft Support Bearing (MPGM) - Lubricate 1 fitting Drive Shaft Spline (MPGM) - Lubricate 1 fitting Frame Lower Pivot Bearings (MPGM) - Lubricate 1 fitting Rollover Protective Structure (ROPS) (If Equipped) - InspectEvery 2000 Service Hours or 1 Year*
Hydraulic Tank Oil (HYDO) - Change Differentials and Final Drives Oil (TDTO) - Change Engine Valve Lash - Adjust Engine Valve Rotators - CheckEvery 3000 Service Hours or 2 Years*
Cooling System Coolant - Change*First Perform Previous Service Hours Items