WIPER GP-WINDOW 3934218 - Caterpillar

PARTS NEEDED
Qty
Part Number Description
1 5P9267 SEAL
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 32% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.
ACTION REQUIRED
When the machine is being work on for routine service, inspect the base of the fuel filter.
- If the 213-0064 Base has a drill mark as shown in Image1, then the base and switch has been verified by the factory as good and no action is needed.
- If the 213-0064 Base does not have a drill mark as shown in Image1, then remove the 275-1253 Switch (Image2) from the base and inspect the bottom of the bore that contained the switch. If no seal is present (as shown in Image3), then place a 5P-9267 O-ring Seal to sit at the bottom of the bore (Image4). Reinstall the switch into the bore and tighten to 6.78 +/- 1.41 N-m.
Note: the 5P-9267 O-ring Seal will provide a seal between the bottom face of the switch and the bottom of the bore.)
Image1
Image2
Image3
Image4
SERVICE CLAIM ALLOWANCES
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
0-10000 hrs,
0-72 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 1.0-hour job
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.