WIPER-ROD 3E4141 - Caterpillar

Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01951701
Remove retaining ring (1) and retaining ring (2). Remove bearing assembly (3) and output shaft (4) .
Illustration 2 g01965019
Disconnect harness assembly (5) and harness assembly (6). Remove the connecting hardware.
Illustration 3 g01794474
Disconnect harness assembly (7) and remove the connecting hardware.
Illustration 4 g01951654
Remove bolts (8) and cover (9) .
Illustration 5 g01951658
Remove O-ring seal (10), magnetic filter (11) and screen (12) .
Illustration 6 g01951648
Remove bolts (13) and oil pan (14) .
Illustration 7 g01794498
Remove seal (15) .
Illustration 8 g01794539
Remove tube assembly (16) and tube assembly (17). Remove bolts (18) in order to remove housing (19) .
Illustration 9 g01795913
Remove bolts (20) in order to remove gear pump (21) .
Remove bolt (22) .
Illustration 10 g01795953
Remove O-ring seal (23) .
Illustration 11 g01951660
Illustration 12 g01951662
Remove plug (24) and bolt (25) .
Illustration 13 g01951669
Attach Tooling (B) and a suitable lifting device onto torque converter (26). The weight of torque converter (26) is approximately 227 kg (500 lb).
Remove nuts (27). Remove torque converter (26) from the transmission.
Illustration 14 g01802851
Remove seal (28) .
If necessary, remove studs (29) .