WIRE AS 1111322 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     1P-0074     Slide Hammer Puller     1    Start By:
Remove the fuel injection lines. Refer to Disassembly and Assembly, "Fuel Injection Lines - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00519296
Loosen hose clamp (1) .
Disconnect hose (2). Put caps or plugs on all openings immediately in order to prevent contamination in the fuel system.
Remove bolt (3) and remove the clamp (4) that secures the fuel injection nozzle.
Illustration 2 g00519338
Use tool (A) (not shown) in order to carefully remove fuel injection nozzle (5) .Note: Align the centerline of Tool (A) with the extended centerline of fuel injection nozzle (5). This procedure will help prevent distortion of the fuel injection nozzle which can cause the fuel injection nozzle to bend or break.
Remove the compression seal (6) from the fuel injection nozzle.