WIRE AS 1842541 - Caterpillar

Illustration 1 g01122292
Illustration 2 g01122294
Typical solenoid connectionsWhen the electric starting motor is viewed from the pinion end, the motor rotates in the following direction. ... ClockwiseNo load conditions at 25 °C (77 °F) Speed ... 6950 1650 rpm Current draw ... 115 25 amp Voltage ... 23 V (1) Tighten the nut on the ground terminal to the following torque. ... 30.5 3.5 N m (22 3 lb ft) (2) Three wires are the maximum between the nuts. Tighten the nut on the battery terminal to the following torque. ... 30.5 3.5 N m (22 3 lb ft) (3) Tighten the ground terminal to the following torque. ... 2.25 0.25 N m (20 2 lb in) (4) Tighten the nut on the switch terminal to the following torque. ... 2.25 0.25 N m (20 2 lb in) (5) Tighten the nut on the motor terminal to the following torque. ... 30.5 3.5 N m (22 3 lb ft) (6) Tighten the nut on the motor frame terminal to the following torque. ... 30.5 3.5 N m (22 3 lb ft)SolenoidCurrent draw at 20 V and 25 °C (77 °F) Pull-in windings ... 49.3 3.3 Amp Hold-in windings ... 6.8 Amp maximum