WIRE AS 1Q1111 - Caterpillar

Assembly Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     1P-1855     Retaining Ring Pliers     1    
Illustration 1 g01346546
Install the O-ring seals, housing (28), and bolts (27) .
Illustration 2 g01346545
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install O-ring seals (26), spring (25), and washer (24) .
Use Tooling (A) in order to install retaining ring (23) .
Illustration 3 g01346544
Install cartridges (22) .
Illustration 4 g01346543
Install plate (21), plate (17), plate (20), coils (16), bolt (19), and bolt (18) .
Illustration 5 g01346542
Install cup (15) .
Illustration 6 g01346541
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install plate (15), plate (13), rod (10), plate assembly (14), springs (11), swivel assemblies (12), and nuts (9) .
Illustration 7 g01346539
Install adapter (8) and bolt (7) .
Illustration 8 g01346538
Install pin assembly (6) and pin (5) .
Illustration 9 g01419840
Install plates (4) and bolts (3) .
Illustration 10 g01419758
Install boots (2) and handle (1) .End By: Install the valve. Refer to Disassembly and Assembly, "Pilot Operated Hydraulic Control (Joystick) - Install".