WIRE AS. 2802294 - Caterpillar

1. Operate the machine until the transmission oil reaches a temperature between 150 and 250 degrees Fahrenheit (65 and 90 degrees Celsius).2. Remove the oil from the system at the transmission. Use your operator's manual to learn the correct method for removing the transmission sump screen.Remove the screen and clean it carefully. Install it with new gaskets.3. Remove the oil filter element. Clean the filter casings. Install new filter element.4. Fill the transmission reservoir to the correct level with new oil.5. Operate the engine at a speed between 500 and 600 revolutions per minute for two minutes. This procedure sends oil through the system.6. Make a check of the oil level with the engine running. Use caution near revolving prop shafts. If the oil is now below the correct level, add more oil until the level is correct.7. Make a final check of the oil level when the oil reaches the normal temperature of operation. Add more oil if necessary.