3C8403 WIRE AS Caterpillar parts
Rating:
Alternative (cross code) number:
CA3C8403
3C-8403
3C8403
CA3C8403
3C-8403
3C8403
Weight: 0.09 pounds 0 kg.
For full view, you need register
Information:
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
E 249-2937(1) Seal Locator As 1
5P-7310(1) Bolt 3
9S-8858(1) Nut (Seal Installer) 1
6V-6143(1) Seal Installer 1
5P-1733(2) Seal Locator As 1
5P-7309(2) Bolt 3
9S-8858(2) Nut (Seal Installer) 1
6V-6142(2) Seal Installer 1
(1) Large pilot for crankshaft gear (approximately 85 mm (3.3 inch) diameter)
(2) Small pilot for crankshaft gear (approximately 52 mm (2.0 inch) diameter)
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01526301
Clean the outside diameter of the crankshaft. Note: Install the crankshaft rear seal with the arrow that shows the direction of crankshaft rotation toward the rear of the engine.
Use Tooling (E) to install wear sleeve (2) and crankshaft rear seal (1) as a unit. End By:
Install the flywheel. Refer to Disassembly and Assembly, "Flywheel - Install".
Table 1
Required Tools
Tool Part Number Part Description Qty
E 249-2937(1) Seal Locator As 1
5P-7310(1) Bolt 3
9S-8858(1) Nut (Seal Installer) 1
6V-6143(1) Seal Installer 1
5P-1733(2) Seal Locator As 1
5P-7309(2) Bolt 3
9S-8858(2) Nut (Seal Installer) 1
6V-6142(2) Seal Installer 1
(1) Large pilot for crankshaft gear (approximately 85 mm (3.3 inch) diameter)
(2) Small pilot for crankshaft gear (approximately 52 mm (2.0 inch) diameter)
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01526301
Clean the outside diameter of the crankshaft. Note: Install the crankshaft rear seal with the arrow that shows the direction of crankshaft rotation toward the rear of the engine.
Use Tooling (E) to install wear sleeve (2) and crankshaft rear seal (1) as a unit. End By:
Install the flywheel. Refer to Disassembly and Assembly, "Flywheel - Install".