3C8404 WIRE AS Caterpillar parts
Alternative (cross code) number:
Weight: 1 pounds 0 kg.
Illustration 53 g01189200
Install bearing race (34) and retaining ring (32) into clutch housing (33).
Use two people to install clutch housing (33). The weight of clutch housing (33) is approximately 34 kg (75 lb).
Illustration 54 g01188728
Install seals (31).
Illustration 55 g01188726
Install piston (30), dowels (28), and springs (29). Install discs (26) and plates (27).
Illustration 56 g01193172
Raise the temperature of retainer (25) in order to install the retainer and bearing (24).
Use Tooling (E) in order to install retaining ring (23).
Illustration 57 g01188718
Position retaining ring (21) onto hub (22). Use Tooling (D) to compress retaining ring (21). Install hub (22) into gear (20).
Illustration 58 g01188040
Install hub assembly (19) and bolts (18).
Illustration 59 g01187354
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Attach Tooling (A) and a suitable lifting device to cage assembly (17). The weight of cage assembly (17) is approximately 45 kg (100 lb). Position cage assembly (17). Install bolts (16).
Illustration 60 g01188558
Position ring gear (14) onto hub (15). Install retaining rings (13).
Illustration 61 g01188554
Lower the temperature of bearing (11) and install bearing (11) into carrier (10). Use tooling (N) to install retaining ring (9).
Lower the temperature of hub assembly (8) and position the hub assembly into carrier assembly (10).
Use Tooling (E) to install retaining ring (12).
Illustration 62 g01190026
Use Tooling (D) to compress retaining ring (6). Install shaft (7) and retaining ring (6).
Illustration 63 g01187301
Illustration 64 g01187302
Install O-ring seal (5).
Attach Tooling (C) and a suitable lifting device to the carrier assembly (4). The weight of carrier assembly (4) is approximately 45 kg (100 lb). Install carrier assembly (4).
Install new clips (3) and bolts (2).
Illustration 65 g01187300
Attach Tooling (A) and a suitable lifting device to transmission planetary (1). The weight of transmission planetary (1) is approximately 953 kg (2100 lb). Remove transmission planetary (1) from Tooling (B). End By:
Install the transmission planetary. Refer to Disassembly and Assembly, "Transmission Planetary - Install".