WIRE AS 3W9278 - Caterpillar

3W9278 WIRE AS Caterpillar parts 65, 75

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA3W9278
3W-9278
3W9278

Weight: 0.03 pounds 0 kg.

Information:

CIRCUITRY CODE 567

COLOR WH

LARGER SCREW SIZE NO 6

LENGTH 175 mm

SCREW SIZE NO 6

WIRE 1E SPEC Copper

Buy WIRE AS 3W9278 Caterpillar genuine, new aftermarket tractor parts with delivery
CHALLENGER,

Compatible equipment models: 3W9278:

CHALLENGER 65 75 Caterpillar

Number on catalog scheme: 14

For full view, you need register

Information:

Test for a Short Circuit
Identify the connectors and the wire numbers of the suspect circuits. Use the Electrical System Schematic of the machine to identify the circuits.
Turn the key start switch and the disconnect switch to the OFF position.
Disconnect the component and the ECM from the wiring harness.
At the machine harness connector for the ECM, place one of the multimeter probes on the contact of the suspect wire.
Use the other multimeter probe to check the resistance across all other contacts in the connectors of the ECM and frame ground. Expected Result: The resistance is greater than 5000 ohms for all the measurements.OK - The resistance is greater than 5000 ohms for all the measurements. The harness circuits are correct.STOP.NOT OK - The resistance is less than 5 ohms. There is a short in the machine harness. The short is between the suspected wire and the wire with the lowest resistance measurement.Repair: Repair or replace the machine harness.STOP.