WIRE AS 4354978 - Caterpillar

Table 1
Effectivity Of The New 236-3216 Support    
Model    Effectivity    Adaptability    
345B Series II     S/N:ALB370
S/N:AKJ198
S/N:AGS2332
S/N:DCW324
S/N:AKX315     S/N:ALB1-369
S/N:AKJ1-197
S/N:AGS1-2331
S/N:DCW1-323
S/N:AKX1-314    
345B MH Series II     S/N:APB293     S/N:APB1-292    
W345B Series II     S/N:CDY323     S/N:CDY1-322    
Table 2
Improved Support    
Item    Qty    New Part Number    Description    Former Part Number    
1     1     236-3216     Support     143-4244
143-4321    
2     4     8T-4136     Bolt     8T-4137    
3     4     8T-4121     Hard Washer     8T-4121    
4     4     099-1426     Spacer     099-1426    
5     3     7Y-2854     Spacer     7Y-2854    Support Replacement
Use the following procedure for the replacement of the support.
Remove the ten bolts and seven spacers that secure the cover for the control valve. Retain the bolts for reassembly of the cover.
Remove the cover.
Illustration 1 g01021777
Hydraulic Tank And The Former Supports (A) 8T-4137 Bolt (B) 8T-4121 Hard Washer (C) 143-4244 Support (D) 143-4321 Support
Remove the four bolts (A), four washers (B), three supports (C), and support (D) .
Illustration 2 g01021836
Hydraulic Tank And The New Support (1) 236-3216 Support (2) 8T-4136 Bolt (3) 8T-4121 Hard Washer (4) 099-1426 Spacer (5) 7Y-2854 Spacer
Install a new support (1). Assemble the support to the hydraulic tank with four bolts (2) and four washers (3) .
Reposition the cover on the new support. Align the holes. Use the ten bolts that were retained in Step 1. Assemble the bolts and the spacers. Use the four new spacers (4) and the three new spacers (5) that are shown in Illustration 2.