WIRE A. 9H5403 - Caterpillar

Removal Procedure
Start By:
Connect the steering frame lock. Note: Note the position of the wiper blade assemblies before removal.
Illustration 1 g02448265
Disconnect hose (1.)
Remove bolts (3). Remove wiper (4). Remove cap (2). Repeat this step for the remaining wiper.
Illustration 2 g02448307
Remove clip (8), washer (7), nut (6), and washer (5). Repeat this step for the remaining clip, washers, and nut.
Illustration 3 g02448420
Remove screws (10) and remove cover (9).
Illustration 4 g02448492
Cut cable strap (12) and disconnect harness assembly (11).
Illustration 5 g02448720
Remove nuts (14) and remove wiper motor (13).
Repeat Steps 1 through 6 for the opposite side of the machine. Installation Procedure
Install wiper motor (13) in the reverse order of removal.
Tighten nut (6) to a torque of 30 3 N m (22 2 lb ft).
Tighten bolts (3) to a torque of 14 2 N m (124 18 lb in).