WIRE AS 9V9293 - Caterpillar

9V9293 WIRE AS Caterpillar parts 225, 229, 235, 235B, 235C, 235D, 245

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA9V9293
9V-9293
9V9293

Weight: 0.02 pounds 0 kg.

Buy WIRE AS 9V9293 Caterpillar genuine, new aftermarket tractor parts with delivery
EXCAVATOR,

Compatible equipment models: 9V9293:

EXCAVATOR 225 229 235 235B 235C 235D 245 Caterpillar

Number on catalog scheme: 15

For full view, you need register

Information:

Illustration 1 g00835826
Typical schematicTest Step 1. Check for Connector Damage.
Turn the ECS to the OFF/RESET position.
Turn the battery disconnect switch to the OFF position.
Thoroughly inspect the ECM connectors J1/P1 and J2/P2. Inspect all of the other connectors. Refer to the diagnostic functional test Troubleshooting, "Inspecting Electrical Connectors" for details.
Perform a 45 N (10 lb) pull test on each of the wires in the ECM connector that are associated with the circuit.
Check the ECM connector (allen head screw) for the proper torque of 6.0 N m (55 lb in).
Check the customer connector (allen head screw) for the proper torque of 2.25 0.25 N m (20 2 lb in).
Check the harness and the wiring for abrasion and for pinch points.Expected Result:All connectors, pins, and sockets are completely coupled and/or inserted. The harness and wiring should be free of corrosion, of abrasion or of pinch points.Results:
OK - The connectors and wiring are okay. Proceed to test step 2.
Not OK - The connectors and/or wiring are not okay.Repair: Repair the connectors or wiring and/or replace the connectors or wiring.STOPTest Step 2. Check the OFF Status of the Emergency Stop Push Button (ESPB).
Pull out the ESPB in order to deactivate the push button. Some versions of the ESPB must be turned clockwise before you pull out the ESPB.
Connect the Cat ET to the service tool connector J60/P60. Start the Cat ET.
Turn the battery disconnect switch to the ON position.
Turn the ECS to the STOP position.
Monitor the status of the Emergency Stop on Cat ET.Expected Result:The ESPB should pop out. The Emergency Stop should indicate OFF on the Cat ET.Results:
OK - The ESPB pops out. The Emergency Stop indicates OFF on the Cat ET. Proceed to test step 3.
ESPB Does Not Pop Out - Repair: Replace the ESPB.STOP
Not OK - The ESPB pops out. The Emergency Stop does not indicate OFF on the Cat ET. Proceed to test step 4.Test Step 3. Check the ON Status of the Emergency Stop Push Button (ESPB).
Push in the ESPB in order to activate the push button.
Connect the Cat ET to the service tool connector J60/P60. Start the Cat ET.
Turn the battery disconnect switch to the ON position.
Turn the ECS to the STOP position.
Monitor the status of the Emergency Stop on Cat ET.Expected Result:The Emergency Stop should indicate ON on the Cat ET.Results:
OK - The emergency stop indicates ON.Repair: The problem may be intermittent. Check the harness and all electrical connections of the ESPB circuit. Perform the diagnostic functional test Troubleshooting, "Inspecting Electrical Connectors".STOP
NOT OK - The Emergency Stop does not indicate ON on the Cat ET. Proceed to test step 4.Test Step 4. Test the ECM.
Turn the ECS to the OFF/RESET position.
Turn the battery disconnect switch to the OFF position.
Connect the Cat ET to the service tool connector J60/P60. Start the Cat ET.
Locate a suitable jumper wire.
Connect P1-02 and P1-24 to P1-29 at ECM connector P1.
Turn the battery disconnect switch to the ON position.
Turn the ECS to the STOP position.
Monitor the status of the Emergency Stop