WIRING GP-ENGINE ELECTRONIC 1214082 - Caterpillar

Illustration 1 g01447939
Illustration 2 g01447943
View A-A
Direction of rotation for the electric motor from the pinion end ... ClockwiseNo load conditions at 25 °C (77 °F) Speed ... 6900 1800 rpmCurrent draw ... 150.5 27.5 AmpVoltage ... 11 V (B) Clearance between the pinion and the housing ... 9.1 mm (0.36 inch) (1) Final installation torque for the ground terminal nut ... 30.5 3.5 N m (270 30 lb in)Note: A maximum of three cable terminals or wire terminals may be used with the battery terminal nut (2). A maximum of two of the cable terminals may be equal to or greater than 0 AWG. (2) Final installation torque for the battery terminal nut ... 30.5 3.5 N m (270 30 lb in) (3) Final installation torque for the start relay terminal screw ... 1.70 0.25 N m (15 2 lb in) (4) Final installation torque for the ground terminal nut ... 2.25 0.25 N m (20 2 lb in)Note: The switch terminal must be insulated with heat shrink tubing. Do not use molded terminals. (5) Final installation torque for the switch terminal nut ... 2.25 0.25 N m (20 2 lb in) (6) Final installation torque for the motor terminal nut ... 30.5 3.5 N m (270 30 lb in) (7) Final installation torque for the motor frame terminal nut ... 8 3 N m (70 27 lb in)Solenoid assemblyCurrent consumption at 10 V and 25 °C (77 °F) Pull-in windings ... 97 AmpHold-in windings ... 18 Amp