WIRING GP-RIDE CONTROL 1860305 - Caterpillar

Removal Procedure
Start By:
Release the hydraulic system pressure.
Connect the steering frame lock.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Illustration 1 g06110150
Remove plate (1).
Illustration 2 g06110157
Remove hose assemblies (2), (3), (5), and (6). Disconnect entire harness assembly (4).
Illustration 3 g06110161
Remove hose assemblies (7), (8), (9), and (10).
Illustration 4 g06110168
Remove bolts (11).
Illustration 5 g06110172
Use two people to remove main control valve (12). The weight of main control valve (12) is approximately 53 kg (117 lb).Installation Procedure
Install main control valve (12) in the reverse order of removal.