WIRING GP-QUICK COUPLER 1864595 - Caterpillar

Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 8S-9906 Ratchet Puller 1
B 9U-6600 Hand Hydraulic Pump 1
216-3914 Track Repair Group 1
6V-4103 Forcing Pin 1
6V-4109 Spacer 1
C FT-1577 Guide Pin 2
D 9U-6600 Hand Hydraulic Pump 1
6V-3170 Double Acting Cylinder 1
E 9U-6600 Hand Hydraulic Pump 1
216-3914 Track Repair Group 1
6V-4103 Forcing Pin 1
6V-4105 Forcing Pin 1
6V-4107 Bushing Adapter 1
Put the track pin in position behind the front idler.
Illustration 1 g00626351
Put blocks (3) in position under the front of the track.
Put blocks (2) in position under the track in order to keep the track away from the track roller frame when the pressure is released in the track adjuster.
Release the pressure in the track adjuster. See Disassembly and Assembly, "Track - Separate".
Put Tooling (A) in position, as shown. Use Tooling (A) to keep the track in position when the track pins are removed.
Remove the bolts. Use a suitable lifting device to remove four track shoes (1) over the track pins.
Illustration 2 g00626357
Fasten a suitable lifting device to Tooling (B). Put Tooling (B) in position against the track pin.
Push the track pin out of the track with Tooling (B). Install Tooling (C) in order to hold the track together until the other end of the track pin is removed.
Put Tooling (B) in position against track pin (4). Push track pin (4) out of the track and install Tooling (C). Remove Tooling (B) from the track.
Illustration 3 g00626359
Put Tooling (D) in position between links (5) and (6). Use Tooling (D) to spread the links enough to move link (7) away from links (5) and (6).
Remove Tooling (C) from links (5), (6), and (7). Note: Make sure that you do not damage the face of the seals when the links are moved.
Fasten an appropriate lifting device to link (7). Move the link away from links (5) and (6). Put a block under link (7) in order to keep the link away from links (5) and (6).
Illustration 4 g00626360
Put Tooling (D) in position between links (8) and (9). Use Tooling (D) to spread the links enough to remove link assembly (10).
Fasten an appropriate lifting device to link assembly (10).
Remove Tooling (C) from links (8) and (9) and link assembly (10). Remove the link assembly. The weight of the link assembly is 31 kg (68 lb).
Illustration 5 g00626361
Remove seal assemblies (11) from links (5) and (6).
Illustration 6 g00626364
Put the link assembly in position in Tooling (E), as shown.
Remove link (6) from the bushing with Tooling (E).
Remove the other link from the bushing with Tooling (E).