WIRING GP-HARVESTER HEAD 1964824 - Caterpillar

1964824 WIRING GP-HARVESTER HEAD Caterpillar parts HH45

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA1964824
196-4824
1964824

Caterpillar 1964824 WIRING GP-HARVESTER HEAD

Buy WIRING GP-HARVESTER HEAD 1964824 Caterpillar genuine, new aftermarket tractor parts with delivery
HARVESTER HEAD,

Compatible equipment models: 1964824:

HARVESTER HEAD HH45 Caterpillar

Number on catalog scheme:

Caterpillar 1964824 Parts scheme WIRING GP-HARVESTER HEAD

For full view, you need register

Information:

Test Procedure (Remote Pressure Tap)
The following test procedure will determine if the pressure of the oil that is delivered from the brake valve is within the specified limit.
Move the machine to a smooth horizontal location.
Lower all of the implements. Engage the parking brake. Turn off the engine.
Illustration 3 g01478654
Illustration 4 g01195237
The brake control valve is located under the cab. (B1) Pressure tap for the brake (1) Brake control valve
Locate pressure tap "B1". This pressure tap is located on the top of the brake control valve (1) .Note: If equipped, pressure tap "B1" is located on the top of the back cover of the transmission at the rear of the machine. Refer to Illustration 3.
Assemble Tooling (A) . Make sure that you use 8T-0855 Pressure Gauge (A1) .
Attach Tooling (A) to pressure tap "B1".
Start the engine. Warm the power train oil to a temperature of 80° 10°C (176° 18°F).
Operate the engine at high idle. Make sure that the transmission is in NEUTRAL and that the parking brake is in the OFF position.
Check the pressure at Tooling (A1) . The pressure at Tooling