WIRING GP-ENGINE 1982714 - Caterpillar

Removal Procedure
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life.
Illustration 1 g06115452
Remove hose (1), tubes (2) and (3), and shielding (4).
Illustration 2 g06115488
Remove shielding (6).
Remove nuts (7) and exhaust bypass (5).Installation Procedure
Inspect all gaskets for wear and damage. Obtain a new gasket, if necessary.
Install exhaust elbow (21) in the reverse order of removal.
Tighten 2 diagonal nuts (15) to a torque of 25 6 N m (18 4 lb ft). Tighten remaining nuts (15) to a torque of 25 6 N m (18 4 lb ft). Tighten all nuts to 47 9 N m (35 7lb ft).