WIRING GP-PLATFORM 2374485 - Caterpillar

Illustration 18 g02898978
Illustration 19 g02897836
Install seals (22) and (23).
Illustration 20 g02905558
Use suitable bolts to install piston (21).
Illustration 21 g02905539
Install carrier (17) and seal (18). Install bearing race (16).
Illustration 22 g02905656
Use suitable bolts in order to position hub (14).
Illustration 23 g02905760
Illustration 24 g02905719
Fasten the crossblock from Tooling (M) to clutch carrier (7) in order to secure hub (14), as shown.
Reposition clutch carrier (7). Install Tooling (M) in order to install bearing race (15).
Illustration 25 g02897803
Reposition clutch carrier (7). Install plate (20) and discs (19).
Illustration 26 g02897797
Install plate (13). Install retaining plates (12) and bolts (11). Tighten bolts (11) to a torque of 50 7 N m (37 6 lb ft).
Illustration 27 g02904999
Use Tooling (N) to align turbine (10) to carrier clutch (7). Install turbine (10).
Illustration 28 g02905017
Install bolts (9). Tighten bolts (9) to a torque of 80 10 N m (59 7 lb ft).
Illustration 29 g02897760
Reposition carrier clutch (7). Attach Tooling (A) and a suitable lifting device to clutch carrier (7). The weight of clutch carrier (7) is approximately 132 kg (290 lb).
Install clutch carrier (7) and bolts (8). Tighten bolts (8) to a torque of 240 25 N m (177 18 lb ft)
Install spring washer (6), plate (5), and bolts (4). Tighten bolts (4) to a torque of 120 15 N m (89 11 lb ft).
Illustration 30 g02897756
Attach Tooling (A) and a suitable lifting device to adapter (3). The weight of adapter (3) is approximately 36 kg (80 lb).
Install adapter (3) and bolts (2). Tighten bolts (2) to a torque of 120 15 N m (89 11 lb ft).
Illustration 31 g02897739
Use Tooling (A) and a suitable lifting device to remove torque converter (1) from Tooling (B). The weight of torque converter (1) is approximately 318 kg (700 lb). End By:
Install the torque converter.