WIRING GP-AUTOLUBE CONTROL 2881772 - Caterpillar

Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide", for tools and supplies suitable to collect and contain fluids in Caterpillar machines.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00493628
Typical example
Put an identification mark on the wire for the engine oil pressure sensor. Disconnect wire (2) for the engine oil pressure sensor.
Remove engine oil pressure sensor (1) from the cylinder block.Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g00493628
Typical example
Install engine oil pressure sensor (1) in the cylinder block.
Connect wire (2) for the engine oil pressure sensor.