3113639 WIRING GP-WIPER Caterpillar parts
422E, 422F, 428E, 428F, 432E, 432F, 434E, 434F, 442E, 444E, 444F
Rating:
Alternative (cross code) number:
CA3113639
311-3639
3113639
CA3113639
311-3639
3113639
BACKHOE LOADER,
Compatible equipment models: 3113639:
Information:
TYPE="LEVEL" DEPTH="1" @@@-->Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 2 Start By:
Remove the turbochargers. Refer to Disassembly and Assembly, "Turbochager - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00615014
Install Tooling (A) in the top of exhaust elbow (1). Attach a suitable lifting device onto Tooling (A). The weight of exhaust elbow (1) is approximately 48 kg (106 lb).
Remove bolts (2). Lift exhaust elbow (1) from the engine.
Illustration 2 g00615016
Remove the bolt and clamp (3). Remove bolts and clamps (4) from each end of tube assembly (5). Remove tube assembly (5). Inspect the seals at the end of tube assembly (5). If the seals are damaged or deteriorated, obtain new seals for assembly.
Illustration 3 g00615017
Attach a suitable lifting device onto support bracket (7). The weight of support bracket (7) is approximately 117 kg (257 lb).
Remove bolts (6). Remove support bracket (7). Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 2
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 4 g00615017
Attach a suitable lifting device onto support bracket (7). The weight of support bracket (7) is approximately 117 kg (257 lb). Position support bracket (7) onto the engine.
Install bolts (6).
Illustration 5 g00615016Note: Ensure that the seals are installed in the ends of tube (5).
Position tube assembly (5) and install bolts and clamps (4) onto each end of tube assembly (5). Install the bolt and clamp (3).
Illustration 6 g00615014
Install Tooling (A) in the top of exhaust elbow (1). Attach a suitable lifting device onto Tooling (A). The weight of exhaust elbow (1) is approximately 48 kg (106 lb). Position exhaust elbow (1).
Install bolts (2). End By:
Install the turbocharger. Refer to Disassembly and Assembly, "Turbocharger - Install".
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 2 Start By:
Remove the turbochargers. Refer to Disassembly and Assembly, "Turbochager - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00615014
Install Tooling (A) in the top of exhaust elbow (1). Attach a suitable lifting device onto Tooling (A). The weight of exhaust elbow (1) is approximately 48 kg (106 lb).
Remove bolts (2). Lift exhaust elbow (1) from the engine.
Illustration 2 g00615016
Remove the bolt and clamp (3). Remove bolts and clamps (4) from each end of tube assembly (5). Remove tube assembly (5). Inspect the seals at the end of tube assembly (5). If the seals are damaged or deteriorated, obtain new seals for assembly.
Illustration 3 g00615017
Attach a suitable lifting device onto support bracket (7). The weight of support bracket (7) is approximately 117 kg (257 lb).
Remove bolts (6). Remove support bracket (7). Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 2
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 4 g00615017
Attach a suitable lifting device onto support bracket (7). The weight of support bracket (7) is approximately 117 kg (257 lb). Position support bracket (7) onto the engine.
Install bolts (6).
Illustration 5 g00615016Note: Ensure that the seals are installed in the ends of tube (5).
Position tube assembly (5) and install bolts and clamps (4) onto each end of tube assembly (5). Install the bolt and clamp (3).
Illustration 6 g00615014
Install Tooling (A) in the top of exhaust elbow (1). Attach a suitable lifting device onto Tooling (A). The weight of exhaust elbow (1) is approximately 48 kg (106 lb). Position exhaust elbow (1).
Install bolts (2). End By:
Install the turbocharger. Refer to Disassembly and Assembly, "Turbocharger - Install".
Caterpillar SIS machinery equipment:
Caterpillar SIS
442E Backhoe Loader PCR00001-UP (MACHINE) POWERED BY C4.4 (MECH) Engine »
311-3639
WIRING GP-WIPER
444E Backhoe Loader HXB00001-UP (MACHINE) POWERED BY C4.4 (MECH) Engine »
311-3639
WIRING GP-WIPER
422E Backhoe Loader DSK00001-UP (MACHINE) POWERED BY C4.4 (MECH) Engine »
311-3639
WIRING GP-WIPER
428E Backhoe Loader DXC00001-UP (MACHINE) POWERED BY C4.4 (MECH) Engine »
311-3639
WIRING GP-WIPER
432E Backhoe Loader RXS00001-UP (MACHINE) POWERED BY C4.4 (MECH) Engine »
311-3639
WIRING GP-WIPER
434E Backhoe Loader SXB00001-UP (MACHINE) POWERED BY C4.4 (MECH) Engine »
311-3639
WIRING GP-WIPER
434E Backhoe Loader SEF00001-UP (MACHINE) POWERED BY C4.4 Engine »
311-3639
WIRING GP-WIPER
428E Backhoe Loader DPH00001-UP (MACHINE) POWERED BY C4.4 Engine »
311-3639
WIRING GP-WIPER
442E Backhoe Loader EME00001-UP (MACHINE) POWERED BY C4.4 Engine »
311-3639
WIRING GP-WIPER
444E Backhoe Loader NBA00001-UP (MACHINE) POWERED BY C4.4 Engine »
311-3639
WIRING GP-WIPER
434E Backhoe Loader SJL00001-UP (MACHINE) POWERED BY C4.4 Engine »
311-3639
WIRING GP-WIPER
422E Backhoe Loader MAW00001-UP (MACHINE) POWERED BY C4.4 Engine »
311-3639
WIRING GP-WIPER
432E Backhoe Loader JBA00001-UP (MACHINE) POWERED BY C4.4 Engine »
311-3639
WIRING GP-WIPER
432F Backhoe Loader LNR00001-UP (MACHINE) POWERED BY C4.4 Engine »
311-3639
WIRING GP-WIPER
428F Backhoe Loader SJW00001-UP (MACHINE) POWERED BY C4.4 Engine »
311-3639
WIRING GP-WIPER
432F Backhoe Loader SEJ00001-UP (MACHINE) POWERED BY C4.4 Engine »
311-3639
WIRING GP-WIPER
422F Backhoe Loader LRH00001-UP (MACHINE) POWERED BY C4.4 Engine »
311-3639
WIRING GP-WIPER
432F Backhoe Loader Side Shift PXR00001-UP (MACHINE) POWERED BY C4.4 Engine »
311-3639
WIRING GP-WIPER
434F Backhoe Loader LDH00001-UP (MACHINE) POWERED BY C4.4 Engine »
311-3639
WIRING GP-WIPER
444F Backhoe Loader LJJ00001-UP (MACHINE) POWERED BY C4.4 Engine »
311-3639
WIRING GP-WIPER
444F Backhoe Loader Side Shift JXR00001-UP (MACHINE) POWERED BY C4.4 Engine »
311-3639
WIRING GP-WIPER
434F Backhoe Loader MTR00001-UP (MACHINE) POWERED BY C4.4 Engine »
311-3639
WIRING GP-WIPER
428F Backhoe Loader Side Shift RAK00001-UP (MACHINE) POWERED BY C4.4 Engine »
311-3639
WIRING GP-WIPER
428F Backhoe Loader LBH00001-UP (MACHINE) POWERED BY C4.4 Engine »
311-3639
WIRING GP-WIPER
434F Backhoe Loader FLY00001-UP (MACHINE) POWERED BY C4.4 Engine »
311-3639
WIRING GP-WIPER
444F Backhoe Loader FBN00001-UP (MACHINE) POWERED BY C4.4 Engine »
311-3639
WIRING GP-WIPER
Caterpillar parts catalog:
Parts wiring Caterpillar catalog:
3385740
WIRING GP-CONSOLE
432E, 434E, 442E, 444E
432E, 434E, 442E, 444E
3573237
WIRING GP-CAB
422F, 428F, 432F, 434F, 444F
422F, 428F, 432F, 434F, 444F
3573203
WIRING GP-REAR
432F, 444F
432F, 444F
3105613
WIRING GP-HEATER
422E, 428E, 432E, 434E, 442E, 444E
422E, 428E, 432E, 434E, 442E, 444E
3403552
WIRING GP-CAB
422E, 428E, 432E, 434E, 442E, 444E
422E, 428E, 432E, 434E, 442E, 444E
3281944
WIRING GP-REAR
422E, 428E
422E, 428E
4202935
WIRING GP-PLATFORM
428F, 434F
428F, 434F
3573214
WIRING GP-COMMUNICATION
416F, 420F, 422F, 428F, 430F, 432F, 434F, 444F
416F, 420F, 422F, 428F, 430F, 432F, 434F, 444F
1329437
WIRING GP-ENGINE
3508, 3508B, 3512, 3512B, 3516, 3516B
3508, 3508B, 3512, 3512B, 3516, 3516B
2580807
WIRING GP-ELECTRONIC CONTROL
924G, 924GZ, 930G, IT28G
924G, 924GZ, 930G, IT28G
3771849
WIRING GP-CAB
M313D, M315D, M316D, M318D, M318D MH, M322D, M322D MH
M313D, M315D, M316D, M318D, M318D MH, M322D, M322D MH
3282335
WIRING GP-WORK TOOL
236B3, 242B3, 252B3, 257B3, 259B3
236B3, 242B3, 252B3, 257B3, 259B3
3315466
WIRING GP-HEATER
420F, 430F
420F, 430F
1450535
WIRING GP-COUNTERWEIGHT
365B, 365B II, 365B L
365B, 365B II, 365B L
4402316
WIRING GP-PAYLOAD CONTROL
950K, 962K
950K, 962K
3679298
WIRING GP-ELECTRONIC CONTROL
416F, 420F, 428F, 432F, 434F, 444F
416F, 420F, 428F, 432F, 434F, 444F
3386426
WIRING GP-COMMUNICATION
Caterpillar
Caterpillar
1595845
WIRING GP-STEERING CONSOLE
120H, 12H, 135H, 140H, 160H
120H, 12H, 135H, 140H, 160H