WIRING GP-CAB 3509368 - Caterpillar

Removal Procedure
Start By:
Connect the steering frame lock.
Release the pressure in the hydraulic system.
Cylinders equipped with lock valves can remain pressurized for very long periods of time, even with the hoses removed.Failure to relieve pressure before removing a lock valve or disassembling a cylinder can result in personal injury or death.Ensure all pressure is relieved before removing a lock valve or disassembling a cylinder.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the attachments have been lowered, oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Illustration 1 g03590801
Disconnect harness assembly (2) and hose assemblies (3).
The weight of tilt cylinder (4) is approximately 60 kg (135 lb). Attach a suitable lifting device to tilt cylinder (4). Remove pins (1), (5), and tilt cylinder (4).Installation Procedure
Install tilt cylinder (4) in the reverse order of removal.