WIRING GP-ELECTRIC DRIVE 3826854 - Caterpillar

3826854 WIRING GP-ELECTRIC DRIVE Caterpillar parts

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA3826854
382-6854
3826854

Caterpillar 3826854 WIRING GP-ELECTRIC DRIVE

Buy WIRING GP-ELECTRIC DRIVE 3826854 Caterpillar genuine, new aftermarket tractor parts with delivery

Number on catalog scheme:

Caterpillar 3826854 Parts scheme WIRING GP-ELECTRIC DRIVE

For full view, you need register

Information:

Illustration 8 g00288349
Attach Tool (A) to spring assembly (37), as shown. Slowly compress spring assembly (37). Use Tool (A) to install the spring assembly on the shaft.
Repeat Steps 8 and 9 for the spring assembly on the other side of the suspension arm.
Illustration 9 g00288348
Illustration 10 g00288346Note: Apply Tooling (B) to the roller shafts before installation.
Install retaining rings (32) and (36), washers (31), (33) and (35), and rollers (34). Install roller assembly (30) on each side of suspension arm (29). Make sure that the rollers do not bind.
Illustration 11 g00288345
Install two springs (20) and plastic bearings (26) on height adjustment shaft (28). Install retaining ring (27) on each side of height adjustment shaft (28).
Illustration 12 g00288344
Install nut (23), weight adjustment screw (22), two races, the thrust bearing, weight adjustment knob (25) and pin (24). Turn weight adjustment knob (25) in the positive (+) direction to apply tension to springs (20). Install pin (21) in the end of weight adjustment screw (22).
Illustration 13 g00288343
Install damper (18), two bearings (15) and (19), and retainer (17). Install four bearings (16).
Illustration 14 g00288340Note: Apply Tooling (B) to the roller shafts before installation.
Install four rollers (14) and two tether belts (13). Make sure that the rollers do not bind.
Illustration 15 g00288338
Install scissor assembly (8) on lower housing (11). Slide the scissor assembly into slider track (12).
Illustration 16 g00288337
Illustration 17 g00288336
Install lower shaft assembly (10) in lower housing (11). Install locknut (9) on lower shaft assembly (10).
Illustration 18 g00288295
Tip upper housing (7) forward and slide the upper housing onto scissor assembly (8).
Illustration 19 g00288294
Illustration 20 g00288293
Install upper shaft assembly (6) in upper housing (7). Install locknut (5).
Illustration 21 g00288292
Remove fasteners (2). Install boot (4) and two retainers (3).
Illustration 22 g00288290
Install four slider blocks (1).