WIRING GP-FRONT 3895676 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     180-3033     Stands     4    
B     5P-3975     Rubber Lubricant     1    
C     138-7575     Link Bracket     1    Start By:
Remove the tow arm. Refer to Disassembly and Assembly, "Tow Arm - Remove and Install".
Personal injury or death can result from servicing the drive belt.The tractor must be on a hard, level surface before the drive belt is removed or personal injury or death could occur.
Illustration 1 g01070485
Remove the bolts and bracket (1) from the machine.
Illustration 2 g01070486
Remove bolts (3) and plate (2) .
Illustration 3 g01070487
Raise the machine and install Tooling (A) under the machine, as shown.
Purge the track tension system. Refer to Testing and Adjusting, "Accumulator - Test and Charge" in order to release the hydraulic oil pressure in the accumulator.
Install suitable blocks under belt (4) in order to support the belt.
If necessary, apply Tooling (B) in order to aid in the removal of tire assembly (5) from belt (4). Remove nuts (6). Attach a suitable lifting device to tire assembly (5) and remove tire assembly (5). The weight of tire assembly (5) is approximately 51 kg (112 lb).
Illustration 4 g01070488
Remove nuts (7). If necessary, apply Tooling (B) to belt (4) and tire assembly (8) in order to aid in the removal of tire assembly (8) from belt (4) .
Illustration 5 g01070492
Attach Tooling (C) and a suitable lifting device to tire assembly (8). Remove tire assembly (8) from belt (4). The weight of tire assembly (8) is approximately 110 kg (242 lb).
Illustration 6 g01128532
Use a suitable lift truck and remove the suitable blocks from belt (4). Use a suitable lift truck and remove belt (4) from the machine. The weight of belt (4) is approximately 299 kg (660 lb).