WIRING DIAGRAM 3N0935 - Caterpillar

Illustration 1 g03710527
Install plate (23). Use Tooling (B) and a suitable press in order to install bearing (22) (not shown).
Illustration 2 g03710252
Typical Example
Install bearing (21) onto shaft (20).
Illustration 3 g03710739
Use a suitable press in order to install shaft (20) into the housing assembly.
Illustration 4 g03710240
Install the seal and retaining ring (19).
Illustration 5 g03710236
Install swashplate (18) in the housing assembly.
Illustration 6 g03710213
Illustration 7 g03710211
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Install spacer (15), spring (16), and spacer (17) in barrel (12).
Use Tooling (B) and a suitable press in order to compress spring (16) in order to install retaining ring (14).
Illustration 8 g03710208
Install pistons (11) and plate (13) in barrel (12).
Illustration 9 g03710205
Install rotator assembly (10) in the housing assembly.
Illustration 10 g03710360
Install valve assembly (9), sleeve (8), and plug (7). Tighten plug (7) to a torque of 50 5 N m (37 4 lb ft).
Illustration 11 g03710744
Typical Example
Use a suitable press in order to install bearing (6) into cover assembly (2).
Illustration 12 g00497894
Typical Example
Install port plate (5) and pins (4).
Illustration 13 g00497893
Typical Example
Install O-ring seal (3) onto cover assembly (2).
Illustration 14 g03710187
Install cover assembly (2) and bolts (1). Tighten bolts (1) to a torque of 130 15 N m (96 11 lb ft). End By:
Install the hydraulic fan piston motor.