WIRING GP-ENGINE 4937625 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 9U-7536 Lift Stand 1
447-0910 Electric Hydraulic Pump Gp (115V) 1
447-0911 Electric Hydraulic Pump Gp (230V) 1 Start By:
Connect the steering frame lock.
Illustration 1 g00992756
Use Tooling (A) to raise the machine.
Illustration 2 g02514956
Place suitable cribbing between the frame and the rear axle.
Illustration 3 g00992757
Typical Example
Attach a suitable lifting device to tire and rim (1). The weight of tire and rim (1) is approximately 658 kg (1450 lb).
Remove nuts (2) and tire and rim (1).Installation Procedure
Install tire and rim (1) in the reverse order of removal.Note: If new wheel studs were installed, tighten nuts (2) to a torque of 700 100 N m (516 74 lb ft). After all nuts (2) are tightened, loosen nuts (2) prior to completing the torque procedure.
Tighten nuts (2) to a torque of 450 60 N m (332 44 lb ft). Turn nuts (2) an additional (60° 5°).