WIRING GP 5595390 - Caterpillar

If long term storage for a period of time exceeding one year is necessary, contact your local Caterpillar dealer for the preferred procedure to use in your specific case.
This machine may be stored for one year or less in a temperature range of -32 °C (-25.6 °F) to 43 °C (109.4 °F).To store machines in ambient temperatures between -20 °C (-4.0 °F) to 43 °C (109.4 °F), refer to Special Instructions, SEHS9031, "Storage Procedure for Caterpillar Products".To store machines in ambient temperatures between -32 °C (-26 °F) and -21 °C (-6 °F), refer to the following publications and topics:
Special Instructions, SEHS9031, "Storage Procedure For Caterpillar Products"
Operation and Maintenance Manual, SEBU5898, "Cold Weather Recommendations for Caterpillar Machines"
Operation and Maintenance Manual, "Cooling System Specifications"
Operation and Maintenance Manual, "Fuel Specifications"
Operation and Maintenance Manual, "Lubricant Specifications"Note: Do not use the steps that are listed in Special Instructions, SEHS9031 in order to maintain the fuel system.Use the following steps to maintain the fuel system.
Drain the fuel tank. Follow the procedure that is described in Operation and Maintenance Manual, "Fuel Tank Water and Sediment - Drain".
Drain the water separator and replace the filter. Follow the procedure that is described in Operation and Maintenance Manual, "Fuel System Water Separator Element - Replace".
Fill the fuel tank so that the fuel tank is at least 20% full with Calibration Fluid.
Prime the system by operating the fuel system priming pump. Follow the procedure that is described in Operation and Maintenance Manual, "Fuel System Priming Pump - Operate".
Start the engine and run at low idle for approximately 15 minutes in order to allow the calibration fluid to flush the diesel fuel from the system.
Turn off the engine.
Add .15 mL (0.02 oz) for every 1 L (1 US gal) of calibration fluid to the fuel tank. Seal all openings to the fuel tank in order to prevent evaporation of the preservative.
If the engine will be stored or operated at temperatures below -20 °C (-4 °F), refer to Operation and Maintenance Manual, "General Coolant Information" for recommendations on alternate antifreeze mixtures.If the machine will be stored or operated at temperatures below -20 °C (-4 °F), refer to Operation and Maintenance Manual, "Cold Weather Lubricants" for recommendations on alternate lubricants.