WORM 6D3257 - Caterpillar

Breathing ether vapors or repeated contact of ether with skin can cause personal injury. Personal injury may occur from failure to adhere to the following procedures.Use ether only in well ventilated areas.Do not smoke while changing ether cylinders.Use ether with care to avoid fires.Do not store replacement ether cylinders in living areas or in the operator's compartment.Do not store ether cylinders in direct sunlight or at temperatures above 49 °C (120 °F).Discard cylinders in a safe place. Do not puncture or burn cylinders.Keep ether cylinders out of the reach of unauthorized personnel.
Illustration 1 g03846686
Open the engine access door (if equipped) on the left side of the machine. The ether canister is mounted inside the compartment on the side of the engine.
Illustration 2 g06148765
Loosen the retaining clamp. Remove the old canister by turning the canister counterclockwise.
Remove the old gasket. Install the new gasket.
Install the new canister. Turn the canister clockwise. Hand tighten the canister. Tighten the clamp around the canister.
Close the engine access door (if equipped).