WRENCH-SPANNER 5F9693 - Caterpillar

Illustration 1 g06014423
Table 1
Specification for 315-4474 Bucket Cylinder Gp
Item Qty Part Specification Description
1 1 290-9182 Bushing During the press fit, insert the bushing in the cap assembly with the tapered side first.
Bore before assembly is 90.21 0.04 mm (3.552 0.002 inch).
Installation depth is 9.85 0.30 mm (0.388 0.012 inch).
2 1 123-2112 Special Locknut Before assembly, lubricate the face and all round the threads with 8T-9579 Oil all around before assembly.
Torque to 13500 700 N m (9957 516 lb ft).
3 2 185-0230 Ring Lubricate the inside diameter and the outside diameter of the rings with clean grease.
4 1 9X-3604 Seal As Lubricate the inside diameter and the outside diameter of the seal with clean grease.
5 1 185-0231 Ring Lubricate the inside diameter and the outside diameter of ring with clean grease.
A 1 357-9785 Cylinder As Bore is 160.050 0.025 mm (6.30117 0.00098 inch).
B 1 357-9794 Rod As Diameter is 109.930 0.038 mm (4.3279 0.0015 inch).
C 1 358-8528 Head Bore over two lands is 110.63 0.03 mm (4.356 0.001 inch).
6 1 462-2008 Bushing Bore before assembly is 100.222 0.020 mm (3.9457 0.0008 inch).
Installation depth is 10.0 0.5 mm (0.39 0.02 inch).
7 1 114-0762 Bushing Outside diameter is 115.148 0.032 mm (4.5334 0.0013 inch).
Thickness is 2.475 0.025 mm (0.0974 0.0010 inch).
8 1 333-8687 Buffer Seal Lubricate the sealing lip of the buffer seal lightly with the lubricant that is being sealed.
9 1 333-8688 U-Cup Seal Lubricate the sealing lip of the U-cup seal lightly with the lubricant that is being sealed.
10 1 133-6814 Lip Type Seal Lubricate the sealing lip of the lip type seal lightly with the lubricant that is being sealed.
11 - - Prior to assembly, apply green Loctite 609 to the wiper seal groove.
12 8 7Y-5239 Bolt Torque to 300 30 N m (221 22 lb ft) and additionally turn to an angle of 30 5 degrees.