WRENCH A 5P0964 - Caterpillar

5P0964 WRENCH A Caterpillar parts

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA5P0964
5P-0964
5P0964

Weight: 2 pounds 0 kg.

Buy WRENCH A 5P0964 Caterpillar genuine, new aftermarket tractor parts with delivery

Show more prices Caterpillar parts

For full view, you need register

Information:

Use this procedure to troubleshoot a problem with an ignition transformer. Also, use this procedure if one of the following diagnostic codes is active or easily repeated.
Table 1
J1939 Code and Description Comments
1393-5
Engine Cylinder #1 Ignition Transformer Secondary Output : Current Below Normal When the engine is running, the Electronic Control Module (ECM) detects a low current flow in the primary circuit for the ignition transformer.
The code is logged.
1394-5
Engine Cylinder #2 Ignition Transformer Secondary Output : Current Below Normal When the engine is running, the ECM detects a low current flow in the primary circuit for the ignition transformer.
The code is logged.
1395-5
Engine Cylinder #3 Ignition Transformer Secondary Output : Current Below Normal When the engine is running, the ECM detects a low current flow in the primary circuit for the ignition transformer.
The code is logged.
1396-5
Engine Cylinder #4 Ignition Transformer Secondary Output : Current Below Normal When the engine is running, the ECM detects a low current flow in the primary circuit for the ignition transformer.
The code is logged.
1397-5
Engine Cylinder #5 Ignition Transformer Secondary Output : Current Below Normal When the engine is running, the ECM detects a low current flow in the primary circuit for the ignition transformer.
The code is logged.
1398-5
Engine Cylinder #6 Ignition Transformer Secondary Output : Current Below Normal When the engine is running, the ECM detects a low current flow in the primary circuit for the ignition transformer.
The code is logged.
1399-5
Engine Cylinder #7 Ignition Transformer Secondary Output : Current Below Normal When the engine is running, the ECM detects a low current flow in the primary circuit for the ignition transformer.
The code is logged.
1400-5
Engine Cylinder #8 Ignition Transformer Secondary Output : Current Below Normal When the engine is running, the ECM detects a low current flow in the primary circuit for the ignition transformer.
The code is logged.
Table 2
J1939 Code and Description Comments
1393-15
Engine Cylinder #1 Ignition Transformer Secondary Output : High - least severe (1) When the engine is running, the Electronic Control Module (ECM) detects signal voltage that is not in the acceptable range.
The code is logged.
1394-15
Engine Cylinder #2 Ignition Transformer Secondary Output : High - least severe (1) When the engine is running, the ECM detects signal voltage that is not in the acceptable range.
The code is logged.
1395-15
Engine Cylinder #3 Ignition Transformer Secondary Output : High - least severe (1) When the engine is running, the ECM detects signal voltage that is not in the acceptable range.
The code is logged.
1396-15
Engine Cylinder #4 Ignition Transformer Secondary Output : High - least severe (1) When the engine is running, the ECM detects signal voltage that is not in the acceptable range.
The code is logged.
1397-15
Engine Cylinder #5 Ignition Transformer Secondary Output : High - least severe (1) When the engine is running, the ECM detects signal voltage that is not in the acceptable range.
The code is logged.
1398-15
Engine Cylinder #6 Ignition Transformer Secondary Output : High - least severe (1) When the engine is running, the ECM detects signal voltage that is not in the acceptable range.
The code is