5S0276 WRENCH Caterpillar parts
12E, 561B, 955H, 966C, 977H, 980, D4D, D5, D6C
Rating:
Alternative (cross code) number:
CA5S0276
5S-0276
5S0276
CA5S0276
5S-0276
5S0276
Weight: 0.50 pounds 0 kg.
MOTOR GRADER, WHEEL LOADER,
Compatible equipment models: 5S0276:
Information:
Contact with high pressure fuel may cause fluid penetration and burn hazards. High pressure fuel spray may cause a fire hazard. Failure to follow these inspection, maintenance and service instructions may cause personal injury or death.
Contact with high-pressure fuel may cause personal injury or death. Wait 10 minutes after the engine has stopped to allow fuel pressure to purge before any service or repair is performed on the engine fuel lines.
Table 3
Troubleshooting Test Steps Values Results
8. Fuel Supply
A. Check for leaks from the high-pressure fuel lines.
B. Ensure that the vent in the fuel cap is not filled with debris.
C. Ensure that the fuel supply valve (if equipped) is in the full OPEN position.
D. If the temperature is below 0 °C (32 °F), check for solidified fuel (wax).
E. Check the primary filter/water separator for water in the fuel.
F. Check for fuel supply lines that are restricted.
G. Replace the primary and secondary fuel filters.
H. Check the diesel fuel for contamination. Refer to Systems Operation, Testing, and Adjusting, "Fuel Quality - Test".
I. Check for air in the fuel system. Refer to Systems Operation, Testing, and Adjusting, "Air in Fuel - Test".
Fuel system
Result: There is a leak from a high-pressure fuel line.
Repair: Replace the high-pressure fuel line. Refer
Cat SIS web machinery list:
Parts wrench Caterpillar catalog:
9S1375
WRENCH
955H, 977H, D4D
955H, 977H, D4D
9B1496
WRENCH
561B, 941, 955K, 977D, 977H, D6C
561B, 941, 955K, 977D, 977H, D6C
8M7165
WRENCH--CLUTCH ADJUSTMENT
12E, 561B, 955K
12E, 561B, 955K
9F3869
WRENCH--FRONT IDLER ADJUSTING
941, 955C, D4D, D5
941, 955C, D4D, D5
1324194
WRENCH
307B
307B
5W1048
WRENCH-ADJ.
205, 206
205, 206
5P7320
WRENCH- 38.10 mm (1.50 in.) OPENING
943, 963, 973
943, 963, 973
2P2255
WRENCH
931B
931B
5B0789
WRENCH 1 1/2" & 1 5/8" OPENING
16, 583H, 594, 631C, 651, 834, 950, 966C, 977D, 977H, 980, 988, D9E, D9G
16, 583H, 594, 631C, 651, 834, 950, 966C, 977D, 977H, 980, 988, D9E, D9G
2B4433
WRENCH ASSEM.
Caterpillar
Caterpillar
4H4464
WRENCH
127, 25, 619
127, 25, 619
5B0786
WRENCH 1 1/16" & 1 1/8" OPENING
12E, 16, 561B, 583H, 594, 631C, 651, 657, 941, 950, 955C, 966C, 977D, 977H, 980, D4D, D5, D6C, D8H, D9E, D9G
12E, 16, 561B, 583H, 594, 631C, 651, 657, 941, 950, 955C, 966C, 977D, 977H, 980, D4D, D5, D6C, D8H, D9E, D9G