WRENCH A. 7F1709 - Caterpillar

Illustration 1 g03639738
(1) Torque for two bolts ... 47 9 N m (35 7 lb ft) (2) Torque plug ... 50 5 N m (36.88 3.69 lb ft) (3) Torque for the hex socket setscrew ... 25 6 N m (18.44 4.43 lb ft) (4) Before assembly, lubricate the threads of the head with clean grease. Torque for the head ... 600 130 N m (443 96 lb ft) (5) Before assembly, lubricate the sealing lip of the three seals lightly with the lubricant that is being sealed. (6) Torque plug ... 50 5 N m (36.88 3.69 lb ft) (7) Before assembly, apply Loctite 515 Gasket Eliminator to the bottom of the connector plate. (8) Apply sealant to threads prior to assembly. Torque for the socket setscrew ... 25 6 N m (18.44 4.43 lb ft)
Table 1
Wiring Table    
Item     Pin     Color     Function    
9     1     OR     VS    
10     2     BK     GND    
11     3     WH     Sig    
12     4         Unused     (A) Outside diameter of the piston over two lands ... 88.40 0.03 mm (3.480 0.001 inch) (B) Bore of the cylinder assembly ... 88.90 0.08 mm (3.500 0.003 inch) (C) Diameter of the rod ... 63.450 0.038 mm (2.4980 0.0015 inch) (D) Bore of the head over four lands ... 63.78 0.05 mm (2.511 0.002 inch)